First, inspect the roofing carefully to identify the exact location of the damage. Remove the loosely bound debris from the gap of the roof with the help of a knife. Do not dig too deep into the surface to prevent any further damage. As you remove the debris you will find that water has been accumulated under it. Drain out the water and let the area get dried up completely. Then take some roof cement, apply it on the affected area and seal it properly. Or better yet, call a roofing contractor.
You need to identify the problem before you can carry out any repair.
The car failed because it has a problem The problem will require repair There are literally a thousand possible problems, each with a special repair needed.
Replace the lamp , Yes. Other then that , NO.
The powertrain control module has detected a possible problem with the emission control system. Have your vehicle scanned for any trouble codes in order to repair the problem.
There is a problem with the SRS. Take it to a professional for repair. This is not a DIY repair.There is a problem with the SRS. Take it to a professional for repair. This is not a DIY repair.
If the brakes were working before bleeding and now are worse, then is possible all of the air is not out of the system. Check the wheel cylinders and master cylinder for leaks, and re check any parts just replaced. It is possible that the last repair done to the system caused the problem.
The powertrain control module has detected a possible problem with the emission control system. Have your vehicle scanned for any trouble codes in order to repair the problem.
Depending on the problem and if you do not want to reinstall the OS(remember backup) you can either restore Windows to a prior date before the problem or boot with a Windows 7 DVD and try a repair. You can also access prompt from the DVD and run diskcheck and bootrec commands. Do research before using commands.
Unfortunately, this has happened before. The screen, or mesh, sometimes pulls away and loosens, necessitating more surgery in order to repair this problem.
The powertrain control module has detected a possible problem with the emission control system. Have your vehicle scanned for any trouble codes in order to repair the problem.
form_title= Computer Repair Online form_header= Repair your computer online with a few simple steps. What equipment do you need?*= _ [50] Please explain the problem in detail.*= _ [100] Have you ever worked on a computer before?*= () Yes () No What is your budget for the computer repair?
It is on because the ECU has detected a problem with the emissions system. Take it to a professional for repair of the problem. He will reset the light after the repair.It is on because the ECU has detected a problem with the emissions system. Take it to a professional for repair of the problem. He will reset the light after the repair.