0
You want to cut a hole of 245mm diameter in steel plate of 20mm thickness on radial drill machine what should you do?
Wiki User
∙ 14y ago
You can develop a hole saw cutter for the purpose, with a pilot.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is thin cylinder?
for thin cylinder the thickness to diameter ratio should be less than 0.07
When using a sanding machine what should be the minimum thickness of my piece of stock?
There are five or more types of sanding machines and each have its own operating parameters. It should have the thickness or strength enough to withstand the working force exerted on it and it can be judged easily by the operator.
What should be done to prevent a person from falling from height while working on radial drilling machine or while welding at height by sitting on shell and welding the nozzle the height around 4 mtr?
4000ft
Will I get a better tread life from radial farm tractor tires bias ply tires?
You should get radial tires because if you go to www.mud-throwers.com it lists all of the disadvantages and advantages. So you should spend a little more money on the radial tires.
What should the welding machine be set at for a 7018 welding rod in 3G?
That depends on the diameter of the rod if it is 1/8" set your amperage between 125 and 140.
Isuzu Rodeo rear rotor thickness?
The rear rotor thickness should be three quarters of an inch, when new. The rotor should not be reused when the thickness is less than one half inch.
When taking a pulse on an adult what is the primary artery that should be used?
radial
It is the thickness or width of the index finger?
Technically its width but if you are talking to someone they should know what you mean by thickness.
Should radial tires all ways rotate in the same direction for the life of the tire?
yes they should
How do you stop pipes from sweating?
You need to wrap your pipes with insulation. The insulation is sold in six foot lengths at most plumbing or A/C supply stores. You should get insulation that is slightly larger inside diameter than the outside diameter of your pipes. The wall thickness should be at least one inch. Make sure you use duct tape or electrical tape when covering turns in the pipe.
What is the condition where there is a difference in apical and radial pulse?
The Pulse Deficit
What is the diameter of a circle that has a circumfrance of 21.98m?
The diameter should be 7m.
