Two walls are 14 ft x 12 ft = 168 square ft (or tiles) each wall or 2*168 = 336 for both walls.
Two walls are 10 ft x 12 ft = 120 square ft (or tiles) each wall or 2*120 = 240 for both walls.
336 + 240 = 576.
So you may need 578 tiles to cover all four walls.
In reality, the thickness of the tile at the corner reduces the amount of tile needed at the adjacent wall by the amount of the thickness. I.e. if the tile is a quarter inch thick and goes all the way to the wall, than its adjoining wall will need 1/4 inch less tile, or 1/2 inch less tile from both sides.
Most tile installations include a separation of about 1/8 to 1/4 inch between tiles which is filled with grout. That also reduces the total number of tiles needed.
Since during installation, you don't know exactly what will happen, and you need to consider the possibility of mishaps such as dropping tiles and breaking or mis-cutting, it is a good idea to get extra tiles at the beginning and return excess tiles when done, or keep a few for future replacement.
Divide the width by the length: width -------- height
What is the overall height, width and length of a 1991 Chevy 1500?
A cube (3D) has length, width and height. A square (2D) drawn on a piece of paper only has length and width - in the case of a square, all sides have the same length.
It doesn't matter but Length * Width * Height is usually how people say it :D
multiply length times height times width
No, just length X width.
No. It has NO length, NO width, NO height. Only a position.No. It has NO length, NO width, NO height. Only a position.No. It has NO length, NO width, NO height. Only a position.No. It has NO length, NO width, NO height. Only a position.
height*length*width = volume Divide both sides by length*width to find the height: height = volume divided by length*width
You really should know how to answer that question.Volume = (length) x (width) x (height) .Length = (volume) / (width x height)Width = (volume) / (length x height)Height = (volume) / (length x width)
You multiply the width or length by the the height.
volume = length*height*width Rearrange the formula: length = volume/height*width
You measure the height, width, and length.
All solid figures have length, width and height and, conversely, if a figure has length, width and height then it is a solid figure.
Volume = Length x Width x Height. If the prism is square, then either Height = Width or Height = Length In the first case, Volume = Length x Width2 and so Width = sqrt(Volume/Length) and Height = Width. In the second case, Volume = Length2 x Width and so Width = Volume/Length2 and Height = Length.
if a is number of tiles high and b is tiles wide then, (x+a) = height and (x+b) = width so the polynomial is (x+a)(x+b).
Length (breadth, width or height are also used).Length (breadth, width or height are also used).Length (breadth, width or height are also used).Length (breadth, width or height are also used).
Type your answer here... You first need to make an assumption that both the tiles are square and the ceiling is square, otherwise there are any number of possible answers. Each tile would therefore measure 2 ft x 2 ft. The ceiling would be 7 tiles x 7 tiles. The width of the ceiling would be 7 tiles x 2 feet = 14 feet.