03 blaster it won't Idel unless you unplug the thing above the carb the throttle cable goes into a 2wire plug then it idels way too high any answers would be great thanks?

Answer 1

That little unit above the carb that the throttle cable goes thru is in place as a kill switch if the carb gets stuck wide open. By bypassing that unit (I believe is is called T.O.R.S. unit) your motor wont shut off, but you are also stuck wide open. Either the needle in your carborator could be bent, or most likely it has something to do with your Throttle cable. The cable and rust on the inside over time and can cause the cable to get stuck or the cable may be frayed. (As mine was) With the bike off, Take the air filter hose off of the carborator, but leave the carb attached to the motor. Hit the throttle a couple times and see if the needle inside the carb gets stuck up. If it does it is probably your cable, if you can't find any fraying, you may be able to get some WD40 or some other lubricant to soak down inside the cable housing to free up the cable. I just got a new throttle and the kit bypassed the TORS unit on my bike, and now I am hving problems with an exptremely touchy trottle, so if you end up getting new cables, make sure they work with the TORS unit, hoped this helped. And good riding!