The formula you are looking for is I = HP x 746/1.73 x Volts x %Eff. x pf.
A transformer's capacity is rated in volt amperes(V.A). This is the product of the secondary winding's current rating and voltage rating.
none the energy is in the amps
Volt amps is the same way of saying watts. This is seen in the formula Watts = Volts x Amps. Using the formula I = W/E we transpose I = 20000/240 = 83.33 amps.
6000amps <<>> The above answer must have big lugs to accommodate 6000 amp capacity wire. In my breaker catalogue the largest 120 volt single pole breaker is 70 amps, 277 volt single pole is 150 amps and 347 volt single pole is 100 amps. The 120 volt single pole breaker occupies two opposed slots because of its length.
LxW of building x 3 volt amps per sq. foot
Multiply the vots by the amps to find the volt-amps. Or divide the volt-amps by the voltage to find the amps.
Amps is a measure of current flowing in a circuit. Volt-Amps or (VA) is a measure of power and is equivalent to wattage for a pure resistive load.
Depends on the battery. It is listed on the battery as Cold Cranking Amps (CCA).
Add another leg of 120 to a three pole breaker.
88 amps
230
70,000 Volt Amps
you will need 21.81 amps at 220v
Divide the circuits amperage into the volt amps and you will get the voltage.
To find your amps, divide your volt amps listed by the voltage you are using (and the device is rated for).Power in watts = Volts X AmpsVolts equals amps X resistance. All of these formulas can be transposed to find the missing element.If something is listed as 360 Volt amps and the voltage used is 120 volts it draws 3amps. So if the same device was used on a 240 volt circuit it would draw 1.5 amps. the power company charges for power (watts) so the volt amps are listed on the device and costs you the same regardless of the voltage used.If the same thing was designed for 12 volts it would draw 30 ampsThe current in amps is equal to the apparent power in volt-amps divided by the voltage in volts:A = VA / V
No you cannot house amps use 120 volt ac car amps use 12 volt dc
The formula for amps is I = W/E. Amps = 40/240 = .17 primary amperage. For the secondary amperage I = W/E. Amps = 40/24 = 1.7 amps.