0
not sure what model or series you refering too, but many times in Mercedes of that era, high idle is due to a dead Overload protection relay. It's is one or two ten amp fuses that you can get from any auto shop. Usually this solves the problem.
If not, usually for that year there is a screw by the idle control valve that you can use to adjust the idle.
Add your answer:
Earn +20 pts
Is running an 02 Pontiac Grand AM at 2000 RPMs regularly when driving too high RPM?
NO
What causes a 1996 V6 Ford Contour to run slow and high rpm?
Running slow with high rpm is a sign of slippage. If the vehicle is a straight drive then the clutch is not grabbing and is slipping, if its an automatic then the transmission is slipping internally.
Why is your RPM at zero?
Your engine is not running or your "RPM gauge" is broken.
Where should rpm idle be set 1985 volkswagen cabriolet?
On an 85 Volkswagen cabriolet it should be set at 975rpm ±25 if you're running stock cams
What is timing setting and idle RPM for a 1985 ford 5.0 high output engine?
I believe the ignition timing for a 5.0 L high output engine in a 1985 Ford Mustang is : 10 degrees BTDC ( with a manual transmission ) and 8 degrees BTDC ( with an automatic transmission ) I don't know what the idle RPM is supposed to be , anybody else know ?
What is the factory horsepower for a ford mustang 5.0 ho?
5.0 High Output horsepower--- 1982: 157 bhp @ 4200 rpm 1983/'84: 175 bhp @ 4200 rpm 1985: 210 bhp @ 4400 rpm 1986: 200 bhp @ 4000 rpm 1987-'92: 225 bhp @ 4000 rpm 1993: 215 bhp @ 4200 rpm
Will high rpm blow heads?
Running an engine at high RPM for extended periods can increase the risk of damaging components like the cylinder head due to increased heat and stress. However, proper maintenance and ensuring the engine is in good condition can help mitigate this risk. Monitor oil and coolant levels regularly and avoid prolonged high RPM operation.
If you lower the RPM on a 2002 Chevy Trailblazer LS will this help with gas mileage?
yes driving at a speed where the engine is running with a slower RPM then a speed where it is running at faster RPM will save a little fuel.
What difference between running torque and starting torque?
Torque is the the force required to move a body about its fulcrum. The starting Torque is the force required to move the body from 0 rpm to the stipulated rpm, the Running torque is the force required to maintain the rpm. The Starting torque is often higher than the running force. Imagine peddling a push bike with one gear (say the one gear is a high gear), the force required to set off will be relatively high in comparison to the force you exert in order to maintain a velocity.
Does nitros work at low rpm?
Nitrous really doesn't care at what rpm the engine is running at, whether it be low end or high end. Whatever amount of hp the nitrous is set to add, it will add at any rpm. Although, you need to be careful because you cant overload the engine at low rpm's or you'll start breaking things.
What is the maximum current of the pole changing motor when running at low speed and high speed?
The maximum current of the pole changing motor when running at low speed and high speed depends on a few different things. The average when begin at low speed and using high speed is 1800 RPM points.
What is the idle speed of a 1985 Honda shadow VT700?
1000 RPM
