You can go to your local public library and see if there is a repair manual (Chilton or Haynes) for your vehicle available for checkout. Chapter 6 (Haynes book) will have all the details on how to manually retrieve the trouble codes and what each code means.
Using the pull starter with the engine running can cause damage to the starter mechanism and the engine itself. The pull starter is designed for starting the engine, and engaging it while the engine is already operating can create excessive tension on the starter cord and internal components. This can lead to potential breakage or malfunction of the pull starter system. Additionally, it may pose a safety risk if the cord snaps or if the engine stalls unexpectedly.
maybe your idle to low, if it continues, I have the fluid injection relay switch replaced.
Mine did that, it was the fuel pump!
Replace the fuel pump. I had an S-10 that acted similarly - turned out it needed new spark plugs and wires.
Why engine stalls on 1993 Chrysler Intrepid while driving and sometimes at stops?
Sounds like the EGR valve needs to be cleaned or replaced.
because it's a peice of junk
Check for vacuum leaks.
The light comes on when the car stalls because the engine is not running and the pump therefore is not pumping. The pressure will always be 0 when the engine stalls and the light is directly related to pressure. This is normal, you have no problem, other than the engine stalling.
Check the engine thoroughly. FInd out where the coolant is leaking. If it's leaking from the side of the block, you've probably thrown a rod and it's stopping the engine and the starter won't be able to turn it.
It would help to know when it stalls? leaking air hoses in the engine compartment can be a problem. There are a number of them about the engine and it is about time you just replace all of them.
If a car engine stalls when turning, there could be a problem with the power steering pump. There could also be an issue with an emissions control device.