It is the little round shaped part that is stick out the valve cover in the front of the engine. It is the little round shaped part that is stick out the valve cover in the front of the engine.
To change the PCV valve on a 1992 Chevrolet Lumina with a 3.1-liter engine, first, locate the PCV valve, which is typically found on the valve cover. Disconnect the hose attached to the valve and remove the old PCV valve by twisting it out. Insert the new PCV valve into the valve cover, ensuring it fits securely, and then reattach the hose. Finally, start the engine and check for any vacuum leaks.
# Locate the EGR valve at the rear of the engine compartment by the firewall bolted to the engine next to the brake booster # Using a adjustable wrench loosen the connection at the base of the valve loosen the collar and push the fitting down do not move the tube # Remove the nuts/studs securing the valve to the engine # Remove the EGR valve and gasket discard the gasket
First locate the distributor which is somewhere near the back of the engine and it will be sitting on the fuel rail. Beside the distributor will be a metal tubing and this tubing will have a cap or a valve that looks similar to the ones that are used to inflate tires. That is the valve.
The 1992 Nissan modulator valve can be found on the firewall in the engine compartment. The valve will be on the drivers side of the firewall.
Yes, the 1992 VW Jetta 1.8 engine is an interference engine.
The PCV (Positive Crankcase Ventilation) valve on a 1992 Acura Legend is typically located on the valve cover. You can find it near the rear of the engine, close to the intake manifold. It may be secured with a rubber grommet or a small hose that connects it to the intake system. Always ensure the engine is cool before attempting to locate or service the PCV valve.
Valve cover
At the back of the passenger side on the engine.
what is a proportional valve. have a 1992 dodge Dakota and it needs a new one I am told. need a schematic diagram of a braking system to locate it.
AnswerOn the 1992 Sable with either the 3.0L or 3.8L it is on the back valve cover (closest to the passenger compartment). It is harder to get to the PCV on the 3.8L engine. The actual PCV is connected to a rubber grommet on the engine valve cover and the other side PCV there is a hose that leads to another part of the engine.
It is on the back left hand side of the intake close to the left valve cover
The 1992 Oldsmobile IAC valve can be found attached to the firewall in the engine compartment. The valve will be on the passenger side of the firewall.