there are 2 marks on the main crank pully. if you have fuel injection, there is a single plastic wedge just to the left and above the pully. if you use carboration, there is a plastic gauge on the right side with timing marks. both are plastic and are part of the timing belt cover. the sticker under the stock hood should indicate where your marks should be when properly timed. also, if you are adjusting timing, make sure you ground the STI connector located near the break booster. it should be a single wire connector with a yellow/BLACK wire. hope this helps ...{ASMDEMON}
if it is DIS it does not matter.
The marks are on the bottom pulley , you may need to get a white marker to hi light it , so it will be easier to see with a light .
Timing for a 1994 ford ranger with a 2.3 l
It has no timing marks because the ignition timing is set by the computer and isn't adjustable.
According to the Gates website ( they make timing belts etcetera ) Yes , the 1.3 liter four cylinder engine in a 1990 Ford Festiva has a timing BELT
where are the timing marks on a ford ka 1.3 and how do i check the timing is correct
timing marks for a ford escape 2002
ford festiva stopped while driving it has fuel and power it just wont turn over
Ford doesn't use timing marks sorry
The Ford Festiva 1994 WB GLi Hatchback has a 38 Litre fuel tank.
under the hood , on the harmonic balancer and the timin marks on the timin eye marker with a timin light
Where are the timing marks on the cam gear on ford 2.9 engine