There is a resistor type thing usually mounted ON the blower motor. There will 3 or 4 wires going to this. That resistor is the culprit. It may be called a relay im not sure. they arent terribly expensive, however sometimes they are difficult to get to
The blower motor speed resistor is burned out.
The blower motor speed resistor is burned out.
Probably your blower motor speed resister is burned out.
If it has only high speed, the blower motor resistor has to be replaced to get all speeds back.
There is a resistor near the blower that is bad, known cause is high speed only.
99% of the time, an interior blower that works only on high speed means the blower motor resistor (the part that actually allows for the speed change) is failed.
either the blower control switch or the blower motoer needs replacing
If you are referring to the blower motor only working on the high speed setting, then the problem is the blower motor Resistor Pack is defective. Replace it. It can be the blower motor speed control switch but not likely.
The blower motor speed resistor is burned out. That part is available from your local auto parts store.
Only for the high speed. The lower speeds are controlled with the use of a blower motor speed resistor.
It would have a high speed relay and it would be in the power distribution box under the hood. The blower speed resister is for the lower speeds only.
The most common cause of the heater blower being on high only is the blower resister failing. The second most common problem is the blower switch going bad.