0
1996 acura tl 2.5 and you keep getting a code for a misfire in cylinder 3 what should you do?
Wiki User
∙ 12y ago
Check your oxygen sensor.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Failed emissions with a P0304 Code on 1997 Acura 25tl the mechanic said this is a catalytic converter problem but is there something else I should test first?
Code p0304 is a cylinder #3 misfire.
1998 Acura CL 2.3 cylinder 1 cylinder 4 and all cylinders misfire misfire code how do you fix this I tried the coil pack ignition module wires plugs with no luck?
There is a good chance the hose leading to the EGR is leaking or has collapsed
Does a 2004 Acura TSX 4 cylinder have a timing chain?
Yes , the 2.4 litre four cylinder engine in a 2004 Acura TSX has a timing CHAIN
Why does your 90 Acura Integra idle rough?
Check idle adjustment (rpm) then check timing, then check for misfire-start there.
When did Acura change to timing chains?
2003 on the 4 cylinder.
How do you change the key cylinder of the ignition switch in a 1991 acura legend?
Remove the retaining ring at the top of your 1991 Acura Legend ignition switch. The ignition switch cylinder will slide out. Remove the wiring harness from the end of the ignition cylinder. Reverse the process to install your new ignition switch cylinder.
What is the firing order for a 1992 Acura Integra LS?
The cylinder firing order for the 1992 Acura Integra is: 1-3-4-2
How do you torque down a cylinder head b18a1 1991 acura?
With a Torque Wrench.
Is a 93 Acura Vigor a 4cylinder or v6?
Neither, its an inline 5 cylinder
What type of coolant should does Acura RSX?
What type of coolant should acura rsx take
How do you change master cylinder Acura Vigor?
Disconnect fluid linesRemove mounting boltsSlide cylinder out of booster REMEMBER TO BENCH BLEED NEW MASTER CYLINDER PRIOR TO INSTALLATION
Where do you check the clutch fluid on an 1991 Acura Integra?
There should be a reservoir near the brake master cylinder reservoir. Normally its located on the drivers side rear of the engine compartment.
