crank sensor or cam sensor
try changing the spark plug wires also
I have a 99 Sable with the OHV 3.0 liter. I have the same problem. Things I have changed so far: the engine computer or (PCM) , the crankshaft position sensor, and the ignition coil. Still have NO spark to the engine. The spark plugs don't spark. I am still waiting for more info. Let me know if you have changed something I haven't. Thanks.
i have changed out the crank sensor, and spark plugs. also i have checked power to the coil pack and still have no spark to the spark plugs. i changed the coil pack as well. i have fuel and i get gas thru the fuel rail. any help.
I had the same problem with my 1998 Explorer. I took it to the dealer and told them there was a miss in the engine. They said it was a glitch in the computerized software and they corrected it and it has been working fine since then.
check firing order
check the cranck angle sensor in the front of engine if not working car never start
Change crank shaft angle sensor ul get a spark
change your sparkplugs
check to see if it's still in time and have the compression checked, if these four are correct it has to run. time, fuel compression and spark. hope it helps
try the moduel
Yes, they still wear out. Most do last 100,000 miles though.
Check the ballist resister on fire wall !!!!
The first thing to check is that you are getting spark at the plug and if your not try changing the ballast resistor on the firewall, it's the white porceloin thing with wires running to it.
Type your answer here... will not start to still run
Check the starter, spark plugs, distributer cap, battery.
check you distributer cap and rotor for wear. if so maybe that's it or bad wires.
It's probably bad wiring somewhere and you need to test the coil connectors for power and try to trace the flaky wiring. It's a pain I know.
try changing trans strainer and fluid. I had that problem before and it worked. The strainer was clogged and fluids wasn't reaching trans. The stick showed it to be full, however the strainer was clogged.
Check spark plug wires, and voltage on the distrubutor.
Check to see if it getting spark/fuel Check rotor