front and rear are disc
You will need to remove the tire and wheel from your 1998 Pontiac Grand Am. Remove the brake assembly spring from the brake pads. The brake pads will come off. Reverse the process to install the new brake pads.
The emergency brakes are whatever your rear brake pads are.
drive cycle for 1998 pontiac grand prix, 3.8 engine, no super charge?
Where is the starter on a 1998 Pontiac Grand Am, 6 cylinder
on a 1998 Pontiac gan am ,they do not have a pcv valve.
usually the locking latch in the door is in the closed position. try holding the handle in the open position and opening the latch manually.
yes as long as the grand am is a 2.4 twin cam also
I have a 1998 Pontiac Grand AM GT that coolant sensor went bad. So how do you change it with out breaking the coolant
Brake rotors or drums need to be machined or replaced. If it causes steering wheel shaking, check front brakes. If happens when applying parking brake look to rear brake problem.
You can easily get all of the color codes for every wire on the 1998 Pontiac Grand Prix. Pontiac has an official website homepage that has all the information on it.
where is the location of the body control module on a 1998 grand am se
drums should pull off with out any adjustment, you may have to perswade them, use a heavy perswader. sometimes drums are corroded and stick to the hub.
All 1985-1998 Pontiac Grand Ams take 19" replacement windshield wiper blades on both sides front.
The torque of the 1998 Pontiac Grand Prix is 220 ft.-lbs. at 4000 rpm. This remained the standard for all sixth generation models of this car.
If it looks the same it will probably work.
i need the torque sequence for a 1998 pontiac grand am 2.4 quad
This website has one. http://www.devicemanuals.com/guide/Automobile/Pontiac/Pontiac-Grand-Prix-Owner%27s-Manual-1998-==TVRFd01qSXc=.html
The warning lights on a 1998 Pontiac Grand Am mean that the vehicle's computer has detected a problem. This can range from low tire pressure to malfunctions within the engine itself.
i got no idea
The camshaft position sensor on a 1998 Pontiac Grand Prix is located behind the rear bearing of the camshaft. It constantly monitors the rotation of the camshaft and relays this information to the computer.