0
1999 Pontiac sunfire timing chain putting it back together crankshaft sprocket does the cone end go first or the flat end?
Wiki User
∙ 13y ago
Flat side first
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Chevy 350 and Pontiac 350 putting together to make one motor?
it will never happen
When was Putting It Together created?
Putting It Together was created in 1992.
Can you replace the crankshaft key way on a 1996 Subaru legacy?
I have had 2 subaru wagons that damaged the keyway when the outer pulley spun free. I figured out a way to fix it. First, only the outer part of the keyway on the crankshaft was damaged. The inner timing belt sprocket was still locked on to the crankshaft. Pull the sprocket off and take it with the pulley to a machine shop. There are two holes in the crankshaft sprocket. Have the machine shop drill (after lining it up with the pulley) through the two holes -through the pulley. Then have him install (you supply) two expansion pins(like the ones holding the inner part of the cv joint to the transmission. They come in different sizes-get one that will squeeze through when compressed. They(when compressed and inserted) will hold the sprocket to the pulley. They will lock on the crankshaft using the inner part of the keyway. When installing you will need to cut the timing cover in half (center section only)-also the lips around the circular part of the cover. The outer part of the keyway you can fix before install by coating a new key with vasoline and putting it in the slot. Then mix liquid weld and fill the damaged section. When dry the key should come out with a little help- tap. It should be free from adhesion due to the vasoline. Smooth the liquid weld to the shape of the crankshaft before it hardens. If you do it right-it will work. Both of mine work fine.
What does the term putting together in algebra mean?
what does the term putting together mean
When did Pontiac start putting in air bags on Trans Am's?
yesterday
What does the cam sprocket line up with when putting on a timing chain?
Generally, for most single cam engines, there is a dot or mark on the cam sprocket and a similar mark on the crank sprocket. Point them at each other. the timing marks on the crank and cam sprockets must be lined up with marks on the timing chain in an overhead cam engine
What do you call the process of putting things together?
Assembly would be a name for putting things together.
Why is your battery light on your 2003 Pontiac Grand Am GT stay on?
Alternator is not putting out a charge.
Name the process of putting things together one word answer bataiye?
Name the process of putting things together one word answer bataiye
What is assembling wood?
Putting it together
Need help putting it together lost directions?
need help putting a 1998 mitzubishi galant tranny back together
Best describes what you're doing in the synthesizing information and drawing conclusions stage of the research process?
When you are doing in the synthesizing information and drawing conclusions stage of the research process you are putting information together.
