Suzuki Quadrunner 160
Intake: 0.03-0.08 mm (0.001-0.003 in.)
Exhaust: 0.05-0.10 mm (0.002-0.004 in.)
At TDC of Compression Stroke.
Remove the TDC plug on the crankcase, at the base of the cylinder on the left side of the engine. (left side when sitting on the atv) There will be a line on the generator rotor which will line up with a mark on the crankcase indicating TDC.
I got these specs from my local suzuki dealer, so they are accurate. I will be adjusting the valves on my 160 soon.
29
bearings or diff. gears worn out.
valve adjustment on 400bayou 1999
intake 7 exaust 9
When Cold :- 0.13 INLET 0.18 Exhaust. Syed Hasan Atizaz
depending on which motor you have 2.0 in the valve cover 2.5 at the rear of the drivers valve cover
From the HAYNES REPAIR MANUAL: Valve Clearance (engine COLD) - Intake: 0.003 to 0.005 inch. Exhaust: 0.006 to 0.008 inch.
inlet is 0.10 to 0.15mm and exhaust is 0.25to0.30mm ...
Intake: 0.003 > 0.005 inch Exhaust: 0.006 > 0.008 inch. Information per: Haynes Repair Manual.
The 1999 Ford Ranger 3.0L V6 engine has a no-interference design. This means that?æ there is enough clearance between the piston and the valves. Therefore, when the timing belt fails, no damage will occur to the engine.
1999 SUZUKI RM125
need diagram for wheel assembly 1999 suzuki vitara