Density of asphalt is depending on several specifications but overall it'll be between 1,010 and 1,300 kg/m3. So this is between 0.99 and 0.77 m3/1000kg
Asphaltic concrete is about 2,240 kg/m3 (0.446 m3/1000kg)
what is the equivalent of 1 meter ton of asphalt to cubic meters?
I use a conversion factor of 152 pcf (pounds per cubic foot) for asphalt, as a general rule of thumb. For a CY, multiply by 27, to get 4,104 pcy (pounds per cubic yard) of asphalt.
1 Meter = 3.2808399 ft to be exact=]
100 TONS
The type of product measured does not change its weight requirement; a ton of feathers and a ton of asphalt all weigh: 2,000 pounds in American and 2,240 pounds in the United Kingdom; systems of measurement.
It of course depends on the depth. An old rule of thumb is one ton will cover one square yard (3'x3') at 18 inch depth. Of course we don't place it 18 inches deep very often. But if you divide 18 by the number of inches you do plan to lay, it will tell you how many square yards can be covered. For example, at 3" depth, divide 18 by 3 = 6 square yards will be covered. Another way is to calculate the volume you are covering in cubic feet such as 15 feet by 50 feet by 3 inches (0.25'), = total cubic feet. Then divide totl cubic feet by 150 (apprx. wt per cubuc foot of asphalt)=TONS NEEDED
would there not be 6 linear meters in 1 cubic meter?? 6 sides on the cubic meter??
Linear meters (Length) can not be converted to cubic meters (Volume)
100000000000 cubic meters
This cannot be done. A cubic meter is a volume and a square meter is an area.
4 meter
one thousandth cubic meter (1 cubic meter = 1000 cubic liter)
5.4 cubic meters
0.000237 cubic meter.
0.000185 cubic meter.
1 cubic yard is about 0.7646 cubic meters.
0.02832 cubic meters.
Since 1 cm = 0.01 meter, 1 cubic cm = 0.013 cubic meter. (1/1,000,000 of a cubic meter)