Engine seized? Loose or corroded battery cables? Dead or weak battery? Bad starter solenoid? Flat spot on starter? Bad neutral safety switch? Bad ignition switch?
2002 ford explorer turn signals not working
To disable the alarm on a 2000 Ford Explorer, remove the fuse designated to the alarm. You can also turn the key halfway on and leave it in the position for 10 to 15 minutes before starting the car.
Turn around and look out the back window.
Looking for Picture of Turn Signal Relay for a 1998 Ford Explorer.
problably your crank positioning sensor, on the front of motor, behind crank pulley. about a $40.00 dollar part. good luck
on my 95' explorer if you turn the radio off you can get the clock. also there is usually a button you press for "display" or says "clock".
Try pushing your turn signal lever forward , that's what I do to turn on my high beam headlights on my 1995 Ford Explorer
Could be the fuel pump or the filter. I had a similar problem for my 1995 explorer xlt.
My Explorer won't turn over; the lights come on and attempted to jump the vehicle. Where is the fuel bottom if engine does not turn over?
On a 1997 Ford Explorer : The push button switch to turn on and off the fog lights is in ( the center stack of the dash , to the right of the radio )
I have a 1995 Ford Explorer XLT and there isn't a switch to turn off the passenger airbag like in the pick-up trucks
There are a couple of reasons why the turn signals will not work on a 1998 Ford Explorer. The light bulbs may need replaced or a fuse has blown.