Unplug the electircal connectors and remove the halogen bulb - Remove the front bumper - Remove the headlight housing mounting bolts and nuts and remove the housing from the body - Installation is the reverse - after you're done adjust the headlight after it is replaced.
Remove the wiring harness from your 2000 Kia headlight. Remove the headlight assembly retaining bolts. Reverse the process to install your new headlight assembly.
Most of the time you don’t have to change the whole assembly, unless its been crushed or broken. The light bulb twists and un screws from the back of the assembly unit.
The headlight assembly on a 2000 Acura Integra is held on using bracket bolts. Prop the hood open and locate the headlights. Unbolt the brackets and remove them. Carefully pry the headlight assembly out to not harm the weatherstripping.
12V
go to back of headlight assembly and twist it out.
open the hood. in back of headlight assembly there are two metal slides with pull tabs. pull them up then wiggle the headlight assembly. it should fall right out. with it out you can get at the bulbs.
No. It secures the headlight assembly in place. The headlight adjustments are the square slot crews that have a spring assembly around them.
Order replace done
on top of headlight assembly, there are 2 tabs to pull up, then pull assembly out.
The best way it to take your Ford Explorer to the nearest Ford Dealer. He will doubtless employ mechanics who will be glad to replace the headlight assembly.
take it out then replace it
T30, 2 of them