0
2000 ford windstar sel right rear lamp light no brake light but has new bulbs what now?
Wiki User
∙ 15y ago
All rear lights are controlled by the rear electronic module located under the interior panel at the right rear D-pillar. Good luck. This symptom is usually the result of a bad module. Replacement is several hundred dollars. I know, I had to replace mine recently for the same problem (among others). Carl
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What fuse is the brake lights on 2000 ford expedition?
The left brake light works the right brake light doesn't and the bulbs is good
Brake lights dont come on when braking bulbs work fine?
The right brake light does not work on 1999 Ford Windstar. Tail lights and blinking light works. Changed bulb more than once, changed the plug in where the bulb goes but it still does not work. The tag lights are not working either.
2000 Ford Windstar right side brake light works center and left doesn't bulbs are good?
Check the individual fuses for those particular lights. Seems most of them are separated on to different electrical circuits.See "Related Questions" below for more
On a 2005 Toyota 4Runner why would the right turn signal and brake light not work but the tail light works?
Have you checked the fuses or bulbs?
What does the symbol on the dashboard of a 2000 ford windstar that looks like a light bulb what does that mean?
One of your exterior bulbs is burned out ( the warning light is in the right / lower area of your instrument panel )
Fuses are good still no brake lights 1996 Chrysler Sebring?
Check bulbs Check stop light switch Also make sure you have the right bulbs model 2057 bulbs.
How do you change the brake light on a 1996 Lincoln Mark 8?
If you are referring to the right and left ones, pull the carpeting away and you will find like 4 nuts that you remove and the whole assembly comes out to change the bulb or bulbs. The 3rd brake light in the rear window has two bulbs which you get to from the trunk. If you are referring to the right and left ones, pull the carpeting away and you will find like 4 nuts that you remove and the whole assembly comes out to change the bulb or bulbs. The 3rd brake light in the rear window has two bulbs which you get to from the trunk.
How do you change brake light bulbs on a 2005 GMC Sierra 1500?
There are two screws in the tailgait jamb, just remove them and the lense comes right out exposing the bulbs.
The license plate and right side brake light bulbs for a 1999 Mercury Sable do not work is that a bad fuse?
The 1999 Mercury Sable license plate light and the right side brake light are on the same fuse. If the fuse was bad neither brake light would work. The problem probably is burnt out lightbulbs.
Getting right brake light message so think you need to change but also left brake light is staying on Any ideas brake switch adjustment?
You might want to check the brake light bulbs on both sides to make sure the are in correctly and clean sockets.
Why would only your third brake light work when brakes are applied in your 1996 jeep grand Cherokee?
your left and right bulbs are problay bad they are two filament bulbs the park filiments are good and the brake filament is bad
What does the symbol on the ford windstar 2001 mean light bulb with an exclamation point inside?
On a 2001 Ford Windstar : That warning light means that one of your exterior bulbs has burned out ( the warning light between the door ajar warning light and the low engine coolant warning light , located in the lower right area of your gauge cluster )
