whare is the 2000 suburban transmission servse plate
Remove transmission oil pan for access
Most likely a 4L60E
As long as it is the same tranny
The price of the transmission itself should run you $2000 - $2500. Depending on if it's 2 or 4 wheel drive. Also the installation of the transmission would not be included in this price.
NO IT WILL NOT.... You MUST stay under the year of 2000 to get the right 1
no, unless the 2000 suburban was really a 1999.5. If the body style is different they will not fit
Where is the reset button on a 2000 Chevy suburban
To adjust the pressure plate on a 2000 Daewoo Leganza with a 5-speed transmission, first, ensure the vehicle is safely lifted and supported. Remove the transmission to access the clutch assembly, then inspect the pressure plate and clutch disc for wear. Adjust the pressure plate by tightening or loosening the bolts evenly to achieve the manufacturer's specified torque. Reassemble the components carefully, ensuring proper alignment, and then reinstall the transmission.
The pan (usually black in color) on the bottom of the transmission serves as a reservoir for transmission fluid. Keep in mind that that it holds only about half of the total transmission capacity.
There's 3 on that truck. You have 1 in behind both front brake rotors and 1 on the transmission tail shaft.
Yes
There is no need for a adapter plate, The 350 trans. bolt pattern is the same as a 400 trans bolt pattern. All Chevy transmission are interchangeable up to the year 2000