Remove transmission oil pan for access
whare is the 2000 suburban transmission servse plate
have to remove the transmission oil pan for filter access
Transmission filters are INSIDE the transmission. You need to remove the transmission oil pan. When you replace the filter, plan on replacing the pan gasket as well.
Transmission filter on a 2000 Honda Accord is located under the air filter housing. Remove air filter housing and then locate the Transmission filter. There are a couple of bolts to remove and one can be a bit difficult. Once the old one is removed snap a new one in (there is a spring that you will have to feel by hand to make sure it is in correct). Replace the air filter housing and then you are good to drive.
Mazda lx 626 2000 how do i chage transmission filter
Well you are in luck - Does not use Transmission Filter.
Most likely a 4L60E
Inside the transmission.
6QTS. with new filter.
The medal pan that you took the plug out of when you drained the fluid has either 16 or 17 bolts in it. Remove those bolts and pry the pan off and you will see the filter.
According to a web based filter company, they noted that the transmission has to be dismantled to replace the filter.
As long as it is the same tranny