mine does the same. i have a spoiler on mine, and i can see when im backed up against a wall at night that one turns on right away and the others are delayed. i think the spoiler lights right away and the others take a second
on a acura integra type r if you brake the head bolts what do you do on a acura integra type r if you brake the head bolts what do you do
where is the fuse box located on a acura
you buy brake pads and you change them
If an Acura Vigor brake light is not working there are likely two reasons. One is that a fuse is blown and the other is that the bulb is blown. It could be both.
To refill the brake fluid for a 1992 Acura, you need to remove the cap on the brake fluid reservoir. Add fluid until the dipstick measures full, or the line on the reservoir that says 'full' is touched by the brake fluid.
On the left side of the brake underneath the dash
The brake light fuse on a 1995 Acura Integra is located inside the cabin of the vehicle. It is on the same circuit as the dash and hazard lights.
The brake lights are located in the trunk of a 1997 Acura Integra. To replace them open the trunk and find the plastic housing. Remove and replace the bulbs.
The 1991 Acura Integra brake lamp number is 2057. See sources and related links below for a picture and more information.
Usually at the upper end of the brake pedal under dash area
it probably has a leak...
On a 1989 Acura Integra hatch back the brake lights are reached through the hatch itself. The brake lights housing are on the rear of the vehicle. Unplug the bulbs and replace them.