use a Pingel Rear Sprocket Spacer. This allows 140 mm tires to be run. Otherwise use 130mm-sized MT90 tire
Remove the tire and wheel from your 2003 GMC 2500 Sierra. Remove the end of the axle. Using a seal puller remove the axle seal. Reverse the process to install your new rear axle seal.
130/90/16 my 2001 haritage sotail has a 150/90/16 with a 3/4 axle and woundering if the 1998 fatboy rear which has a 3/4 axle will fit the heritage... or what year fatboy wheel will fit?
T55
my 2500 has stock 245/75/16r
3/4" diameter
That depends on the make and size of your tires, check with the manufactor of the tires.
For a stock Harley Davidson 1980 Shovel head the widest tire size is the 140. Anything bigger than that will be too close to the stock fender and all the mounting bolts. If a really wide tire is desired then the rear fender, swing arm, and mounts must also be wider. The transmission sprocket must also be offset. Some owners put in up to 190 wide tires.
Monsters HD was created in 2003.
MOJO HD was created in 2003.
The 2004 Silverado HD uses a t-55 torx bit to remove the caliper. The torx can be found and most any auto parts.
It is listed in the owners manual and on the frame of the motorcycle. Until you know exactly what Harley recommends 38 front and 44 rear will suffice.
There is no specific tire pressure -it depends on what tires you have on the vehicle. If you're not sure ask at your tire store.