Rear wheel ABS standard, 4 wheel ABS optional.
4 wheel ABS was an option in 2001.
Rear wheel ABS standard, 4 wheel ABS optional.
Rear abs was standard. 4 wheel was optional.
A 4 wheel abs would have sensor wires running to the front wheel bearings.A 4 wheel abs would have sensor wires running to the front wheel bearings.
On the 1998 Ford Ranger , rear ABS brakes were standard on the XL and XLT 2 wheel drive and 4 wheel ABS was an option on the 2 wheel drive models. The more expensive 4x4 XLT version came with 4 wheel ABS according to my Consumer Guide book - Helpfull My Ranger does have 4 wheel ABS.
First you need to know if the vehicle has 4 wheel or 2 wheel ABS. If its 4 wheel you will have 1 at each front brake rotor and 1 at the top of the rear differential housing. If its 2 wheel ABS it will only have the rear sensor on the diff. First you need to know if the vehicle has 4 wheel or 2 wheel ABS. If its 4 wheel you will have 1 at each front brake rotor and 1 at the top of the rear differential housing. If its 2 wheel ABS it will only have the rear sensor on the diff.
Look for wiring running out to the front wheel bearings. If there are speed sensors at the front wheels, then you have 4 wheel abs.
You have 4 abs sensors, one on each wheel. They are located on the inner side of each wheel.
Check the fuse panel on the driver's end of the dash and look at fuse # 14 If the # 14 fuse is a 20 amp - you have the rear wheel ABS If the # 14 fuse is a 10 amp - you have 4 wheel ABS brakes You would think that the 4 wheel ABS would have a larger fuse , but it's 10 amp
Two wheel abs will only have wheel speed sensors in the rear. Four wheel abs will have wheel speed sensors at all four wheels.
Yes