I don't know exactly what you are asking, but that is 5 Gigabytes.
A little under three gigabytes.
That is about 327 Megabytes, or a little under 1/3 of a Gigabyte.
There are 1,024 megabytes (MB) in a gigabyte (GB). To convert 1,016 MB to GB, you divide 1,016 by 1,024. This equals approximately 0.992 GB. Thus, 1,016 MB is just under 1 GB.
That's just under one Gigibite. There is 1000 MB in one GB. You need 63.898 MB more to get to one GB.
Under a third of a gig. only 26.6% of a GB
A little under 4,700 MB. The disc needs some space for the finalization process.
To convert 600 megabytes (MB) to gigabytes (GB), you divide by 1,024, since 1 GB is equal to 1,024 MB. Thus, 600 MB is approximately 0.585 GB (600 ÷ 1,024 = 0.585). Therefore, 600 megabytes is just under 0.6 gigabytes.
There is just under 9 gigabytes in 9000 megabytes In order to be exactly 9 gigabytes it would have to be 9216 megabytes, here's a conversion table to explain: 1024 Bytes = 1 KiloByte 1024 KiloBytes = 1 MegaByte 1024 MegaBytes = 1 GigaByte 1024 GigaBytes = 1 TeraByte
In actual, 1 GB = 1024 MB. However when buying Pendrives, calculation used for selling is 1GB = 1000 MB. Hence when size of pendrive is seen under "Properties", it is always lesser than what is advertised.
There are 2048 megabytes in 2 gigabytes because there are 210 or 1024 megabytes in one gigabyte. This is complicated slightly by the fact that there are two possible standards. In one (the one used in most computer applications) a gigabyte is 230 bytes and the answer above is correct. In the other (used almost exclusively by drive manufacturers), it's 109 bytes... about 7% less. Under the drive manufacturers' standard, 2 gigabytes is 2000 megabytes (and the megabytes themselves are somewhat smaller as well).
All Emory can be measured in megabytes (MB). The smallest unit is a byte, then kilobyte (1000 bytes), megabyte (1000 KB), gigabyte (1000 MB), terrabyte (1000 GB). A megabyte is just an increment. Just like a foot and an inch bother measure length.
1.06 gigabytes (GB) is equal to 1,060 megabytes (MB), as there are 1,000 megabytes in a gigabyte. To convert gigabytes to megabytes, you simply multiply the number of gigabytes by 1,000. Therefore, 1.06 GB × 1,000 MB/GB = 1,060 MB.