the diagram should be under the hood on the sticker with the emissions information
Your model 58 .410 may have a safety after all. Look at the end of the bolt and see if there is a 'notch' that the 'knob' of the bolt can be pulled and turned until it catches in the notch. I have had several guns designed this way; but, yours may not be. Go the Numrich Gun Parts Corp. website and find the diagram for your model 58. If yours has a letter after the 58, be sure to get the right diagram. There are several different ones. Hope this helps.
get a haynes manual every thing you need is in there
I cannot provide a diagram, but it is simple. Power goes to the light, and the ground wire is use as an interupter on the door switch. The switch breaks the ground connection when the door is shut. So you should have power at the dome light if you just ground the circuit.
I hav just purchased a 58 Chevy apache and are having the same problem. I did find a site that displays a complete diagraham for the entire ststem includingthe ignition switch. The site is http://www.classicchevytrucks.20m.com/cgi-binwiring.jpg Good luck with the changeover wspringerjr@yahoo.com
116
58 - -58 = 116
The additive inverse of 58 is -58.
It is: +58
58+58+48=164
13 percent of 58 = 7.5413% of 58= 13% * 58= 0.13 * 58= 7.54
35% of 58= 35% * 58= 0.35 * 58= 20.3