Want this question answered?
stack segment register
8086 has four multipurpose registers. 1. AX (Accumulator Register) 2. BX (Base Register) 3. CX (Count Register) 4. DX (Data Register) By Aneeta Arshad
Physical address in the 8086/8088 is {Selected Segment Register} * 16 + {Effective Offset Address}. It is a 20-bit address .
The 8086 microprocessor has 40 pins.
RET pops the PC off of the stack, while IRET pops both the flags and the PC off of the stack.
The default segment for SP (Stack Pointer) relative memory accesses in the 8086/8088 is SS (Stack Segment).
It is mightily referring to Microprocessor 8086 . I think you saw "8086 microprocessor". The 8086 is nothing it indicates the number of microprocessor same as Digital or analog ic's . 8086 microprocessor has 20 Address buses and 8 data buses which has 1 Mb inbuilt memory for performing several type of airthmatical and logical operation.
There are four segment registers in the 8086/8088, Code Segment (CS), Stack Segment (SS), Data Segment (DS), and Extra Segment (ES). As a result, there are four segments that can be directly addressed at a particular time, i.e. without an extra instruction to reload a segment register.
queue of 8086 microprocessor is 6 bits
The 8086 Microprocessor operate to require frequency that is provided by clock generator to 8086 Microprocessor and also Synchronization various component of 8086.
it is a 16 bit microprocessor & it has 40 pin .
Pins 1 and 20 in the 8086 microprocessor are (both) power and signal ground (GND).