Check Gas pump and relays
the ignition module is located in the distributor
how to put in a ignition on a Honda accord 1991
how to change manual ignition switch on a 93 Honda accord
if you have been having intermittent power-accessory or dash light failure, and/or the car won't stay started (no idle), then yes, it can be your ignition switch module. when car won't idle, try turning and holding the key halfway between Start and On; if it then idles normally, it is definitely your ignition switch module. easy to replace.
The Ignition Control Module on the 4 cyl models is located under the Distributor cap.
inside the distributor
The Honda Civic 1.6 liter engine ignition switch is held in with a retaining ring. Unscrew the retaining ring. Pull the ignition switch out. Remove the wiring harness from the back of the ignition switch. Reverse the process to install the new ignition switch.
In order to replace the ignition switch in a 1997 Honda CR-V, you must first unplug the ignition switch power source. Unscrew the cover panel, remove the bolts holding the switch, and pull the switch out of the column. Replace the old ignition switch with the new ignition switch, return the bolts and screws, and reconnect the power source.
Take it to AutoZone, and they can test it
If it starts but doesn't stay running after you release the key from the start position, it means your ignition switch is bad. Not a huge expense.
Where is the elctrical part behind the igtion at on my 1992 honda accord
no the switch can be independly remove from the back side of the ignition lock