0
96 ram that turns over but will not fire what should you be checking to fix this i just put in new tranny and broke my crank sensor but replaced it with a new one.but still no spark?
JERRYB31
Check fuel pressure, and check for codes. You will need a scan tool to read the cam and crank sensors while cranking, to see if they are working.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Should a knock sensor be replaced when an oxygen sensor is?
NO. there 2 different things / sensors.
1991 Hyundai Scoupe while checking the air filter the tube connected to the filter hit a bolt on the battery and sparked now car wont idle after it is started why?
In the intake tube there should be a sensor (mass air )if you sparked that sensor it is now shorted and needs to be replaced
Will it hurt engine to drive with bad knock sensor?
Yes it can hurt your engine to drive with a bad knock sensor. The knock sensor should be replaced as soon as possible.
What causes an O2 heater circuit malfunction on a IS 300?
The oxygen sensor is "done". It should be replaced.
How can you tell an o2 sensor is bad?
If your vehicle has a bad sensor the check engine light will come on. Otherwise they should be replaced as recommended by your service manual.
Should I replace the crankcase sensor in 91 ranger - no spark - replaced DIS same thing - how easy is this?
no
How do you fix jarred security sensor 2001 Nissan Sentra 2.0?
If your security sensor in your 2001 Nissan Sentra 2.0 is jarred or jammed you should have it replaced.
How can you fix speed sensor for c280 Mercedes?
Speed sensors generally are not serviceable. The sensor needs to be replaced. It should be an easy change out, either bolted on or screwed in.
What is trouble code p0320 on durango?
po320 indicates acrankshaft position sensor problem should probably be replaced
Should a new motor be purchased when a crank shaft sensor needs to be replaced?
no no no my crank sensor when out on my truck ar 95k now i have 125k and she is still running good
If you replaced the camshaft position sensor should you replace the crankshaft position?
I changed only the camshaft position sensor on my 2000 Kia Sportage. So I don't think so.
If both the idler air sensor and the oxygen sensor shows malfunctioning which should be replaced first on a ford contour 95?
First, change the oxygen sensor and the air filter. Clear the codes and see if the idler air sensor code comes back.
