0
990 millimeters is 38.98 inches.
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
How many inches is 990MM?
By unit of length and distance and conversion ,we can say that 1 mm=0.0393 in' 90 mm=38,9 in
Measurements of batmentin court?
1(a) The court shall be a rectangle and laid out as in the following Diagram A (except in the case provided for in paragraph 1(d) of this Law) and to the measurements there shown, and shall be defined preferably by white or yellow lines or, if this is not possible, by other easily distinguishable lines 40mm (1 1/2 inches) wide. 1(b) To show the zone in which a shuttle of correct pace lands when tested (see Law 4(d)), an additional four marks 40mm by 40mm (1 1/2 inches by 1 1/2 inches) may be made up as follows: -inside each side line for singles of the right service court, 530mm (l foot 9 inches) and 990mm (3 feet 3 inches) from the back boundary line. In making these marks, their width shall be within the measurement given, i.e., the marks will be from 530mm to 570mm (1 foot 9 inches to 1 foot 10 1/ 2 inches) and from 950mm to 990mm (3 feet 1 1/2 inches to 3 feet 3 inches) from the outside of the back boundary line. 1(c)(i) The width 40mm (1 1/2 inches) of the centre lines shall be equally divided between the right and left service courts. 1(c)(ii) The width 40mm (1 1/2 inches) of each of the short service line and the doubles long service line shall fall within the 3.960 metres (13 feet) measurement given as the length of the service court. 1 (c)(iii) The width 40mm (1 1/2 inches) of all other lines shall fall within the measurements given. 1(d) Where space does not permit the marking out of a court for doubles, a court may be marked out for singles only, as shown in Diagram B. The back boundary lines become also the long service lines, and the posts, or the strips of material representing them as referred to in Law 2, shall be placed on the side lines.
How big is 1.61 inches and 1.65 inches and 1.14 inches?
(1.61 inches) + (1.65 inches) + (1.14 inches) = 4.4 inches
What does 0.03 inches equals in fractions?
0.03 inches = 3/100 inches.0.03 inches = 3/100 inches.0.03 inches = 3/100 inches.0.03 inches = 3/100 inches.
What is the average of 54 inches 56 inches 52 inches 53 inches and 57 inches?
54.4 inches.
In inches what is 2.4 inches?
Inches and inches are the same measurement. Therefore, 2.4 inches is equal to 2.4 inches.
Is 1.470 inches equal tohow many inches?
Inches and inches are the same measurement. Therefore, 1.47 inches is equal to 1.47 inches.
What is 40 inches - 3.9 inches?
40 inches - 3.9 inches = 36.1 inches
How many feet is 68 inches?
68 inches is 5'8 feet60 inches= 5ft61 inches= 5'1ft62 inches= 5'2ft63 inches= 5'3ft64 inches= 5'4ft65 inches= 5'5ft66 inches= 5'6ft67 inches= 5'7ft68 inches= 5'8ft69 inches= 5'9ft70 inches= 5'10ft71 inches= 5'11fy72 inches= 6'0ft12*6=7212*5=60
The area of this rectangle is 24 square inches give the dimensions of three other rectangles that have an area of 24 square inches?
1 inch by 24 inches equals 24 square inches 10 inches by 2.4 inches equals 24 square inches 100 inches by 0.24 inches equals 24 square inches 1000 inches by 0.024 inches equals 24 square inches also: 2 inches by 12 inches equals 24 square inches 2.5 inches by 9.6 inches equals 24 square inches 3 inches by 8 inches equals 24 square inches 3.2 inches by 7.5 inches equals 24 square inches 4 inches by 6 inches equals 24 square inches This list could be very long.
How man y inches is multiplied if the answer is 63 square inches?
1 inch by 63 inches, or 3 inches by 21 inches, or 7 inches by 9 inches, or 70 inches by 0.9 inches 700 inches by 0.09 inches There are an infinite number of possible answers.
How many inches is 63 inches?
Inches and inches are the same measurement. Therefore, 63 inches is equal to 63 inches.
