0
99 Chevy lumina and your two brake lights don't work but the middle one does what could be the problem?
Wiki User
∙ 15y ago
TRY TURNING THE EMERGENCY FLASHERS ON AND OFF A COUPLE TIMES THEN CHECK YOUR BRAKE LIGHTS. WORKED FOR ME.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you fix the brake lights on a 1996 Chevy Lumina?
It depends on the exact problem. If it's that both brake lights in the back do not work and the middle one works, it could be your turn signal switch.
Do the head lights always stay on in a 1999 Chevy lumina?
Yes, my uncle has a Chevy lumina and the headlights are always on,its andomatic
Why do lights flicker 1997 Chevy Lumina?
the regulator is getting bad in the alternator
On 1998 Chevy lumina new brake lights were put in only middle light comes on when brakes are stepped on?
Check if the male and female plugs are snapped into place tightly. And check if the lights or fuse is burnt out.
1995 Chevy lumina LS tail lights and turn signals work but brake lights are interminent?
Its the steering colum
How do you fix a 1996 Chevy Lumina's console lights and tail lights that mysteriously just went out together?
CHECK YOUR FUSE
Backup lights on 1995 Chevy lumina not working no power in the wiring what can I do to fix it?
Take it to the garage.
Your 1992 Chevy Lumina is turning but want crank what is it?
My 1990 Lumina 3.1 had the same problem and it was caused by the crank sensor.
Night time running lights will not turn on or dash lights for 95 Chevy lumina?
Check your fuses for these lights. If there is not one blown, you may have to check for a short in a wire.
Where is the carborator on a 1995 Chevy Lumina?
Chevy Lumina has not the carborator.
How do you fix your lighting problem with your 94 Chevy Cavalier Z24 you have no tail lights dash lights or parking lights?
how do you fix your lighting problem with your 94 chevy cavalier z24 you haveno tail lights dash lights or parking lights
94 Chevy Lumina's dome and mirror lights don't work Already checked the bulbs and fuses What else could cause this problem?
You are left with bad switches,corroded contacts, and broken wires.
