0
AC !
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Ac voltage applied across a load resistance produce alternating current?
The reason an AC voltage applied across a load resistance produces alternating current is because when you have AC voltage you have to have AC current. If DC voltage is applied, DC current is produced.
How is a vrs sensor tested with a DVOM?
Back probe both wires of the sensor and use an AC voltage setting or your readings will be bad
What is the voltage of a car alternator and is it ac or DC?
It should produce 14.5v +/- and it's DC.
Why will a dc motor produce v but not an ac motor?
Motors do not produce voltage, current, or power. They use them.they produce mechanical output.
How do you convert hertz into volts?
'Hertz' is the modern name for 'cycles per second' and represents how many times an alternating current (AC) changes from + to - per second and has nothing to do with voltage that can be either AC or DC. Tus if you have an alternator and can rotate the shaft 60 times per second with a voltage of 120 volts you will produce the same AC voltage that you find in your wall outlet (Alternators produce AC while generators produce DC electricity.
When your abs light on your 1995 Tahoe stays on your ac and heater has no power but when the light is off it works?
alternator, short in wiring, voltage regulator, computer
Does a generator produce ac or DC voltage?
NO, generator always generating AC current,when commutator is used,at that time AC is converted in DC.and due to this generator is called dc generator.
Why does a ac voltage applied across a load resistance produce alternating current in the circuit?
Because V = I x R or Voltage = Current x Resistance. Since resistance is linear there is a linear relationship between Current and voltage. If you have DC voltage you have DC current and if you have AC Voltage you have AC current. Note that there is a linguistic recognition of this relationship in that the voltage is described in terms of the current.
How do you check the speed sensor on 2012 Nissan Versa?
Locate the vehicle speed sensor of the vehicle mounted to the rear section of the transmission. Disconnect the electrical connector from the sensor. Remove the retaining bolt from the sensor mounting at the transmission, then pull the sensor out of the transmission. Place the sensor on a flat surface, then slowly turn the sensor gear by hand. Use the voltage meter to check for the pulsing AC voltage from 0 to 0.5 volts. If there is no voltage, the sensor could be defective. Replace the sensor by following the steps for removal in reverse order.
How do you convert 23 voltage DC to 230 Voltage AC?
How do you convert 23 voltage DC to 230 Voltage AC?
When was Voltage AC created?
Voltage AC was created on 2004-12-14.
Why ac voltage varying?
AC voltage is varying because it is sinusoidal in nature
