a number (1) because 8085+1=8086
No, you need a real teacher, and a textbook.
The data and address buses are multiplexed in order to save pin count on the chip. In the first clock cycle of a read or write cycle, the address is emitted on the address/data bus. The ALE signal is used to strobe the address, after which the address/data bus becomes the data bus. External logic is expected to strobe the address at the trailing edge of ALE. ALE is generated directly by the 8085, and by the 8086/8088 in minimum mode. In maximum mode in the 8086/8088, ALE is generated by the 8288 Bus Controller.
Some words that rhyme with Lindale are prevail, unveil, and detail.
ALE is a signal that means that the data bus contains the lower order address bus values. External hardware should strobe the data bus during ALE time, and lock it on the falling edge of ALE.
The 8086 Microprocessor operate to require frequency that is provided by clock generator to 8086 Microprocessor and also Synchronization various component of 8086.
8086 main application is to evaluate the arithmetic operations in any systems that uses 8086
If you mean greater (more) 8086.
WHAT IS THE PINS CONFIGURATION OF 8086?
There are 16 data lines in 8086.
8086 have 5 interrupt lines.
queue of 8086 microprocessor is 6 bits