No, the Chevy cam will not fit in a Ford engine.a 302 ford cam will fit in a 351,but the engine will need to be timed to 302 specs if this is used. Later on H.O. 302 engines had the same firing order as as the 351 Windsor.
AnswerThe firing order of the early 351W engine is different from the late 351W engines. The early 351W�s firing order is 1-3-7-2-6-5-4-8, while the smaller Windsor engine�s firing order is 1-5-4-2-6-3-7-8. What makes this interesting is that 289/302 cams are completely interchangeable with 351W cams, providing you match the firing order to the camshaft. If a 289/302 cam is used in a 351W engine, the firing order must be changed to the 302 sequence 1-5-4-2-6-3-7-8 by moving the wires on the distributor cap. The same procedure is used if a 351W cam is used in a 289/302W engine where the firing order in the distributor cap must match the camshaft. Not only is the firing order different on the 302- and 351W engines, but Ford also numbers its cylinders differently than GM engines. On the Ford it is 1,2,3,4 on the passenger side starting at front of engine, and 5,6,7,8 on the drivers side.I don't know who gave that "answer", but they must be Chevy people!! The 351Modified is NOT a WINDSOR engine!! It is derived from the 351CLEVELAND and it and its big brother the 400 share nothing with the little Windsor. The firing order for the 351/400M engines is 1-3-7-2-6-5-4-8. All the blah blah about 289 cams etc. is totally irrelevant to the question!!
351w=5,752cc
how to static time a ford 351w
163 HP
There are different ways. One is that the 351w fuel pump bolts to the timing cover,the 351c bolts to the engine block. Water flows through the 351w intake manifold and does not on the 351c. The 351w has inline valves and the 351c has canted valves. The 351w has squared intake ports and the 351c has huge round ports. Hope this helps some.
most likely a 351w
300-6 ,302-8 ,351w-8
a c6 transmission is the best match
what carbutor model engine fit in a 1994 ford f150 with a 5.8 lighting engine
The simple difference between the 302 and 351w is simply deck height. The 351w is taller. They share a majority of interchanging components. Both the 302 and the 351w have a water cooled intake meaning a water bypass hose between the water pump and intake. The 351m would have an aircooled intake meaning no bypass hose. Also the head design of a 351m would make the engine look a lot larger (wider) than the 302/351w
The 1991 351 Windsor is electronically fuel injected, so changing the engine would require all of the control modules and fuel injection systems associated with an EFI engine to be put in as well, but it is possible.
No the 351W was not injected until 1988 and was not rollerized untill1994 I believe.