Want this question answered?
Power (W) is work (J) done over time (s). Work (J, Joule) is force (N, Newton) moved through a distance (m). Weight (N) is the force (N) due to gravity which is not the same as someone's mass (kg). mass = 50 kg distance = 5 m time = 7 s Force due to gravity = m x g = 50 x 10 (g = 9.8 m/s2 but 10 is close and easier) = 500 Newtons P = F x d / t = 500 x 5 /7 = 357 Watts
If you do work on an object in half the your power output is
42
Force affects the speed of power output. If the driving force is slow, the speed of power output will also be sluggish. Alternatively, if the driving force is fast, power output will be able to match the speed.
The power factor of an air conditioning unit refers to its level of output. Higher power factors can generate a larger quantity of cooler air, but it comes at an increased cost.
Power supply units are rated based on their output and efficiency. When more equipment is connected, a higher output power supply is needed.
Output power can never be more than input power. With a transformer, it is possible to increase the output current (while decreasing the output voltage), or to decrease the output current (while increasing the output voltage).
amplitude modulation using collector modulator gives:More symmetrical envelope• Higher power efficiency• Higher output power• Need higher amplitude modulatingsignal
becouse its have more input
Power output for a car stereo is pretty standard across the board -- for higher power output you'll need to investigate amplifiers. anonymous@oola.com
Yes,provided that the power output of the investor is higher than the motor's rated power.
Overclocking is when a component is made to go faster than its designed speed in order to get a higher output or a better response or reaction from it. It is used for a vehicle in order to give a higher power output.
7. What is output power?The output power is related to the produced power of the laser beam, which is usually stated in milliwatt (mW). The milliwatt is a unit of power, which is one one-thousand of a watt. Higher power lasers are always more powerful than lower power lasers
Yes. Though the response time of a pneumatic system is better as compared to hydraulic, power output is higher in latter.
A: BEST HOW? the input power does not change for full wave or half wave rectification The output of a half wave will have half of the power available for the output to use so it would be best a low DC requirement yes.
A petrol engine revs higher, which allows it to burn more fuel and output more power.
Power (W) is work (J) done over time (s). Work (J, Joule) is force (N, Newton) moved through a distance (m). Weight (N) is the force (N) due to gravity which is not the same as someone's mass (kg). mass = 50 kg distance = 5 m time = 7 s Force due to gravity = m x g = 50 x 10 (g = 9.8 m/s2 but 10 is close and easier) = 500 Newtons P = F x d / t = 500 x 5 /7 = 357 Watts