One. Starts at the edge, finishes in the middle.
u can get a ruler and place it down on a globe or a measuring tape to find your answers to the problem/questions
The paper rotates on a drum under the pen while the pen moves across the drum.
153624 # IS ON THE INTAKE MANIFOLD NEXT TO THE THROTEL BODY.
If your vehicle has disk brakes, then this is a sign the rotors are warped, not flat like they need to be. When you apply the brakes, the brake pad comes in against the rotor and as it rotates, it should stay flat against the rotor, but yorus must be warper and as the high and low spots rotate by the brake pads, this pulses the pedal which you feel.
Vinyl records are discs with a single groove on each side. The groove has undulations which are picked up by a stylus (needle in crude terms) and a transducer (cartridge) into which the stylus is inserted. The disc rotates at a constant speed and the stylus rides the groove. The signal generated by the cartridge in amplified many thousands of times and is reproduced by loudspeakers. Vinyl is the material which replaced the earlier shellac and even earlier wax as "unbreakable" records.
Angular
Angular velocity means how fast something rotates. The exact definition of angular momentum is a bit more complicated, but it is the rotational equivalent of linear momentum. It is the product of moment of inertia and angular speed.
Orbital Velocity is calculated in m/s where as angular velocity is calculated in rad/s.. Answer is very clear.. angular velocity is calculated when body is rotating around a axis and a reference point is needed to calculate it.. where as orbital velocity is calculated when body is moving around a bado in circular path, nt around itself... e.g. Earth rotates around so it have angular velocity .. it also rotates around sun in orbit so it has Orbital velocity also :)
It was 6 radians per second. Angular acceleration = -3 radians per second2 Initial angular velocity = 6 radians per second. Final angular velocity = zero. Average angular velocity = 3 radians per second. Angular displacement in 2 seconds = 3 x 2 = 6 radians.
No. Torque is required only for producing angular acceleration. A body rotates with constant angular velocity if no external torque acts on it.
Ignoring the fact that some clocks "jump", for example once a second, each of the three arms moves at constant angular velocity. The speed, in this case, is constant; the velocity is not since the direction changes. On the other hand, sometimes people use a vector to describe an angular velocity. Angular momentums add nicely with vector representation.
It means how fast something rotates. Rather than taking the linear speed (meters per second, or some other common unit of speed), the angular velocity is specified in radians per second, degrees per second, revolutions (full turns) per minute, or something similar. By this definition, each part of a solid, rotating object rotates at the same angular speed.
It means the planet rotates slower. To be precise, the angular velocity is less.
That is analogous to linear speed and velocity, but for rotation. Whereas a linear speed (or velocity) is expressed in meters per second (or some other units of distance / time), the angular speed or velocity is expressed in radians / second (or some other units of angle / time). Of course, when something rotates, there is also a linear speed, but different parts of an object rotate at different linear speeds, whereas the angular speed is the same for all parts of a rotating object - at least, in the case of a solid object. For example: the Earth rotates at an angular speed of 1 full rotation / day. The linear speed at the equator is approximately 1667 km/hour; close to the poles, the linear speed is much less.
"Some later CD drives use CLV technology in combination with constant angular velocity (CAV). With CAV, the disc rotates at a constant speed, just as is done with hard drives."(pg 459, A+ Guide to Managing and Maintaining Your PC)
Angular velocity (omega) = delta theta / delta time omega = 2 /4 = .5 rev/s = pi radians/s
if the fan rotates at constant speed ,then it's angular velocity is constant so net torque must be zero