0
A building collapse when the load bearing capacity of foundation exceeds similarly if the current exceeds the power limit the device dies.So Why current in a circuit is not considered as its load?
Wiki User
∙ 12y ago
Different things are measured different ways according to their properties.
The current drawn from a supply is aften called the load current, but the actual load is the device which is connected to a supply and through which the current flows.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What are the fundamental requirements for building a foundation?
Load bearing capacity of the soil
What is the cause of failure of foundation of a building?
The foundation of a building may fain in shear or due to excessive settlement. if the load on the foundation is more than the bearing capacity of soil or the settlement due to the load is more than tne allowable limit than the foundation is said to fail.
What is the difference and connection between soil mechanics and foundation engineering?
soil mechanics is the science dealing with soil to knowing ,type of soil , bearing capacity of the slackening weakness and strength of the soil and by soil mechanics can we give a recommendation to the designer Foundation engineering is design of foundation of any projects ,building ,factories ,stores ....)the design of foundation type depended on the bearing capacity of the soil of the concerned site of the project.
Why does the foundation of a very large building often go all the way down to the bedrock?
Because large buildings weigh a lot. Subsoil has varying degrees of 'bearing capacity' - the amount of weight it can carry. If you put a lot of weight on a subsoil of low bearing capacity it will compact, or be pushed aside. If the subsoil on the site of a large building has insufficient bearing capacity to carry the loads imposed on it by the building then the foundations would have to be taken to bedrock as this has 'unlimited' bearing capacity.
Why are organic soils unsuitable for foundation support?
Bearing capacity and shrinkage tendencies are reasons why organic soils are unsuitable for foundation support. Organic soils have low bearing capacity and therefore may not be counted upon to tolerate extensive floor plans and multiple stories. They tend to shrink so more and more of the building will be exposed with time.
Why build a house on raft instead of foundation?
Its all about the type of soil and the building structure is going to build on it. If the site soil is not the type (i.e; like clay soil, the soil cannot having load bearing capacity etc.,) for constructing big buildings, its better to go for raft foundation. Because, this type of foundation spreads the load of building to overall area and if the foundations are constructing very near by each other means. In that time also, this foundation can be laid.
When was Capacity Building Network - Cap-Net - created?
Capacity Building Network - Cap-Net - was created in 2003.
The Empowerment Foundation?
Corescottan programs focus on the overall capacity building of the participants in order to make them self-reliant and self-sustainable. Our Experts say, the empowerment foundation works with the vulnerable sections of the society especially women through well-strategized impactful interventions in the areas of literacy.
What is turndown capacity?
Its is process term which means the reduced capacity w.r.t. the rated capacity. For example if plant rated capacity is x and turndown capacity is 85% that means 0.85x. And similarly the turndown ratio would be x/0.85x.
What is the minimum length of pile foundation?
its depend on the soil bearing capacity
How can i do Capacity building literature review synthesis?
To do a capacity-building literature review synthesis, start by identifying relevant literature on capacity building in your field. Next, read and analyze the key findings and methodologies of the selected studies. Finally, synthesize common themes, trends, and gaps in the literature to draw meaningful conclusions and recommendations for further research or practice in capacity building.
Difference between deep and shallow foundation?
Shallow foundation: A type of foundation that is used when the earth directly beneath a structure has sufficient bearing capacity to sustain the loads from the structure Deep foundation: A type of foundation that is used when the soil near the ground surface is weak. 1. Light, flexible structure: older residential construction, residential construction which include a basement, and in many commercial structures, 2. Nice soil condition: hard, uniform soil. 3. Cheaper than deep foundation 4. Easier construction 5. Typically types: spreading footing foundation, slab-on-grade foundation, pad foundation, strip foundation, and raft foundation. Spreading footing foundation: controlled by several factors: lateral and vertical capacity, penetration through near surface layers likely to change volume due to frost heave or shrink-swell. Mat-slab foundation: the distribution of loads in a mat slab helps reduce differential settlement due to the non-uniform building loads 1. Heavy, rigid structure: other uncommon building, such as large bridge, tower, and the Empire State Building. 2. Poor soil condition: liquefaction, soft clay and sands. 3. Typically more expansive 4. More complex to construct and more time than shallow foundation. 5. Typically types: battered piles, bearing piles, caissons, and friction piles. Friction piles: Friction piles obtain a greater part of their carrying capacity by skin friction or adhesion. This tends to occur when piles do not reach an impenetrable stratum but are driven for some distance into a penetrable soil. Their carrying capacity is derived partly from end bearing and partly from skin friction between the embedded surface of the soil and the surrounding soil. End bearing piles: End bearing piles are those which terminate in hard, relatively impenetrable material such as rock or very dense sand and gravel. They derive most of their carrying capacity from the resistance of the stratum at the toe of the pile.
