Want this question answered?
hat is the ability to handle long chains
plumage
Neem leaves are in a long cocoon sort of shape with a few pointy edges.
C. head snare
Steel is melted or vaporized, not burned.
Hachrt
the wood blade has sharp long teeth and the metal on has small tiny teeth
Well if you are trying to make a kunai you need. one 10 by 10 inch of square metal about 8 ml thick. Cut out a blade that 0s about or close to 6 1/2 inches long. sharpen the edges on a grinder to the sharpness you want. Next cut out a rectangular metal peice about 2/3 of an inch. weld the blade and handle together then use string to grip your handle. if you want your kunai to be naruto style tie a ring at the end of your kunai's handle.
Wait until it is released. It will not be long.
Scythe
Scythes are tools having a long handle and a long curved single-edged blade. They are used to cut grass, crops, or other plants by swinging the blade close to the ground.
Well if you are trying to make a kunai you need. one 10 by 10 inch of square metal about 8 ml thick. Cut out a blade that 0s about or close to 6 1/2 inches long. sharpen the edges on a grinder to the sharpness you want. Next cut out a rectangular metal peice about 2/3 of an inch. weld the blade and handle together then use string to grip your handle. if you want your kunai to be naruto style tie a ring at the end of your kunai's handle.
1. A Long screw driver with a narrow handle would be better. Depending on the blade size, if the blade was smaller that would work better.ANS 2 - They both have particular uses, and both belong in a properly equipped tool box.
Long screw driver with a narrow handle would give the most torque, therefor it would be best It would also depend on the blade of the screw driver. The blade should fit well into the slot in the screw so if the long screw driver with the narrow handle had a small narrow blade that was too small for the screw then another one would be better.
Sword: A cutting or thrusting weapon that has a long metal blade and a hilt with a hand guard. Synonyms: blade, brand or steel
The metal wheel on the long handle is called a tracing wheel. It is used with tracing paper to put marks from the pattern onto the cloth after the pattern pieces are cut out.
Any mixer with a ceramic blade won't dull much and can be used for quite long periods.