A shovel is a digging tool with a metal blade on a long handle. It is commonly used for digging, lifting, and moving materials like soil, sand, or snow.
hat is the ability to handle long chains
Neem leaves are in a long cocoon sort of shape with a few pointy edges.
Steel is melted or vaporized, not burned.
As a farmer I can tell you that most metals will corrode after long periods time in contact with fertilizer solutions. The only exception is that stainless steal is one of the most resistant to corrosion. Most of the machines that we use to handle fertilizer are made out of stainless steal (blenders, spreader trucks, etc). This is by experience only I don't exactly know why it does what it does.
plumage
A spade is a tool used for digging, typically with a flat, metal blade and a long handle. It is a first-class lever where the fulcrum (pivot point) is at one end, the effort is applied at the other end, and the load (soil being moved) is in between.
A hoe is a tool used for digging and cultivating soil in gardening and farming. It typically consists of a long handle with a metal blade at one end. In a slang context, "hoe" can also be a derogatory term for a promiscuous person.
Hachrt
the wood blade has sharp long teeth and the metal on has small tiny teeth
Wait until it is released. It will not be long.
Well if you are trying to make a kunai you need. one 10 by 10 inch of square metal about 8 ml thick. Cut out a blade that 0s about or close to 6 1/2 inches long. sharpen the edges on a grinder to the sharpness you want. Next cut out a rectangular metal peice about 2/3 of an inch. weld the blade and handle together then use string to grip your handle. if you want your kunai to be naruto style tie a ring at the end of your kunai's handle.
Scythe
1. A Long screw driver with a narrow handle would be better. Depending on the blade size, if the blade was smaller that would work better.ANS 2 - They both have particular uses, and both belong in a properly equipped tool box.
Well if you are trying to make a kunai you need. one 10 by 10 inch of square metal about 8 ml thick. Cut out a blade that 0s about or close to 6 1/2 inches long. sharpen the edges on a grinder to the sharpness you want. Next cut out a rectangular metal peice about 2/3 of an inch. weld the blade and handle together then use string to grip your handle. if you want your kunai to be naruto style tie a ring at the end of your kunai's handle.
Long screw driver with a narrow handle would give the most torque, therefor it would be best It would also depend on the blade of the screw driver. The blade should fit well into the slot in the screw so if the long screw driver with the narrow handle had a small narrow blade that was too small for the screw then another one would be better.
Sword: A cutting or thrusting weapon that has a long metal blade and a hilt with a hand guard. Synonyms: blade, brand or steel
The metal wheel on the long handle is called a tracing wheel. It is used with tracing paper to put marks from the pattern onto the cloth after the pattern pieces are cut out.