There are several kinds of equipment called a "duplexer", including:
* In telecommunications, a duplexer is a device that combines two or more signals into a common channel or medium to increase its transmission efficiency. Simply put the duplexer allows the antenna to be shared between transmit and receiv.
* In printing, a duplexer is used to print on both sides of the paper.
* ...
two antennas are used one for reception and another for transmission without interference
duplexer is the device that can separated the trasmitted signal and received signal.
A duplexer is a device that allows bi-directional (duplex) communication over a single channel. In radar systems, a device that isolates the receiver from the transmitter while permitting them to share a common antenna. Note 1: A duplexer must be designed for operation in the frequency band used by the receiver and transmitter, and must be capable of handling the output power of the transmitter. Note 2: A duplexer must provide adequate rejection of transmitter noise occurring at the receive frequency, and must be designed to operate at, or less than, the frequency separation between the transmitter and receiver. Note 3: A duplexer must provide sufficient isolation to prevent receiver desensitization.Braimah prosper
The meaning of a dip-lexer in a microwave is used for non-broadcast applications. This can be non broadcast on the radio.
A duplexer may refer to a device used in radar and radio communications systems that allows for bi-directional communication, meaning that it allows the user to both send and receive messages. It may also refer to the component of a printer that allows it to simultaneously print both sides of a sheet of paper.
HP Duplexer printers are priced according to the specifications of the printers. Some of the basic printers are priced under $50. The more deluxe models sell for as much as $500.
1.hybrid tee can be used to measure unknown impedance. 2.it is also used as duplexer in radars to use same antenna for transmission and reception. 3.it is used as mixer to convert RF signal into intermediate signal in receiver section.
unidirectional wave length unidirectional power measurement reflectometer balanced duplexer swr measurement
David Chikowore has written: 'Design of 1500 MHZ duplexer for fixed link radio systems'
The way a duplex functions in a cell phone is by having a two - way communication in which both terminals can transmit simultaneously.
A Canon MP830 is capable of scanning, printing, faxing, functioning as an ADF, a duplexer, and a media card reader. It's recommended due to its multiple and easy functions.
Everyone is clear on what a filter is, but there exists a lot of confusion over what is the difference between a duplexer and a diplexer. As you might expect, there are a lot of opinions - even between manufacturers. Traditionally, duplex communications implies the ability to transmit (Tx) and receive (Rx) on the same channel simultaneously. doing so requires a means of separating the transmit and receive paths in a manner rendering them independent of each other, i.e., isolation. Thus, a duplexer is used. One method is to use a circulator for routing signals from the transmitter to the antenna while routing singles from the antenna to the receiver. If the Tx and Rx operate at different frequencies, the job can be accomplished by a set of filters with a common feed point. A diplexer is usually thought of as a set of filters, again with a common feed point, that is used to combine or split signals travelling to or from an antenna, respectively, while providing isolation between the two independent paths. If more than two independent paths are required, the name for both usually changes to a common term: multiplexer.
According to SOWPODS (the combination of Scrabble dictionaries used around the world) there are 2 words with the pattern -----X-R. That is, eight letter words with 6th letter X and 8th letter R. In alphabetical order, they are: diplexer duplexer