to prevent an unduly high electric current to pass
Metal with a lower melting point is preferred for fuse wire to reduce the risk of fire.
The fuse needs a low melting point and reletivelyhigh resistance so that it melts at the proper current
Fuse wire is usually made with metal that has a low melting point, e.g. tin, to lessen the risk of fire.
Apparently mainly tinned copper is used in fuse wires. I have heard that there are a lot of other metals used as teh fuse wire though!
tin lead alloybasically tin lead allows are used . but other metals which have low melting point and appropriate resistivity can be used
8swg refers to the diameter of wire used in a rewirable fuse-link. SWG stands for 'Standard wire gauge', a well-known classification system for wire diameters.
Because those metals have a high meling point, so it's easier and safer to use fuse wire which melts at a lower teamp.
The correct size fuse needed is based on the size wire used in the circuit. The size wire needed is based on the load that will be applied to the circuit. 1. AWG 14/2 wire = 15 amp fuse 2. AWG 12/2 wire = 20 amp fuse 3. AWG 10/2 wire = 30 amp fuse 4. AWG 8/2 wire = 40 amp fuse
If a thick copper wire is used in a fuse then by definition of a fuse this device would no longer be defined as a fuse. A fuse in a circuit is used to protect the conductors feeding the load of that circuit. The circuit, if using a thick copper wire in a fuse, would then be considered as a non fused circuit.
Copper is used in the contact points in fuse boxes because it will oxidize and you can separate the points of contact. If it was made if iron and rusted, it will 'weld' the link together and then it is no longer a fuse.
kundi
fhhjjf