NO. Usually the positive wire will have the fuse.
Negative - (Black) is Ground, Positive + (Red) is Hot. Ground wire goes to Negative (Black) it goes from negative on battery to engine for ground.
No, the ground wire and the negative wire in speaker wire are not the same. The negative wire carries the audio signal, while the ground wire provides a path for electrical safety and interference reduction. Both wires are essential for proper speaker operation.
A corroded ground wire will cause a fuse to blow. Until the ground wire is cleaned the problem will persist.
Turn the power off to the circuit first at your Breaker/Fuse panel. Once you know that the circuit is dead, remove the old fixture. One of the 2 wires goes on the black, the other on the white. If there's a bare ground, ground that to the junction box where the fixture is going. Secure the fixture in place with the provided hardware, and turn the power back on at the breaker/fuse panel. If you did something wrong the breaker will trip/fuse will blow.
You have grounded to the radio light wire, not the ground. It is a negative wire that is in the harness, and when you turn on headlights you blow the dash lights. Remove your radio ground from the car, and find a new ground. It should be a large black and green wire (larger than all the others). replace the fuse, and turn on the lights...you will see your old ground wire is actually hot now. Common mistake, and it tests like ground wire with lights OFF, but not on. Relentless
There is no ground wire in automobiles, they have tires that insulate the vehicle from the ground. There are only positive and negative wires.
Positive Cable from Battery to ground location on frame Negative to Starter Use #2 guage cable for best results Answer No. 2 You don't wire positive ground. Wire negative ground and you will forever be thankful. With a positive ground car everything, like a radio, elect fuel pump, elect fan or anything you add will have to be isolated because everything is made negative ground. You can't wire stuff made negative ground to a positive ground you get the shorts.
If the plastic box has a ground wire attached to the GFCI and the ground at the fuse panel, you do not need to ground the box itself. As long as the ground wire is connected to the GFCI and the fuse panel, the box will be effectively grounded. Just ensure that all connections are secure and properly fastened.
You "ground" it or connect it to a negative source that is connected got the negative end of the battery
Neither - it's neutral !
A fuse is typically connected to the live wire in a circuit. This is done to protect the circuit from an overload or short circuit, as the fuse will blow or trip and cut off the current flow if there is an issue.
any any one positive or negative has to be grounded to reduce wire length , normally -ve is chosen as ground any any one positive or negative has to be grounded to reduce wire length , normally -ve is chosen as ground