The temperature of the metal bar decreases.
The temperature of the cool water increases.
The final temperature of the metal bar will be the same as the final temperature of the water.
Cool air.
Cool a sheet of metal and leave it in the room, if the air contains water vapour it will condense on the cold metal.
the difference in densities caused by the pattern of movement observed when the hot dye was placed in cold water was that the dye rose quickly - since its less dense and began to cool which is why it dropped.
water keeps cool by putting icepacks beside it.
water in pitcher becomes cool because pitcher has small pores on its surface and the water evaporates from pores by using heat of water. in this way evaporation takes the heat and water in the pitcher becomes cool
choices are: The cold will flow from the metal into the hot water, causing the hot water to warm up and the metal to cool down. b. The energy from the hot water will flow into the cold metal, cooling the water down and heating up the metal. c. The cold will flow from the metal into the hot water, causing the hot water to cool down and the metal to warm up. d. The metal will cool down because the specific heat of water is high.
Aluminium is a metal, and solid well beyond the point where water has evaporated. Aluminium is also extremely unreactive with water when simply placed in it. There is thus no reason why the metal would shrink or otherwise change its shape (apart from the obvious one of placing hot metal in cool water, or quenching, but this is a result of thermal effects, not just because you put aluminum in water).
Heat the metal red hot. To harden the metal, cool it quickly by dunking it into cold water. To get a soft metal, let it cool slowly.
The ice will begin melting and will cool the warm water.
water in a metal mug cools down quicker because the air around the mug cools the metal therefor cooling the water inside the mug
please!! i need it urgently
The only explanation of tempering is in metal manufacturing. Heat metal to cherry hot, plunge metal into water to quickly cool metal, hardened metal is created
Cool air.
The water pump and/or an electric motor.
Hot water will cool if placed in a cool area. Or pouring hot water back and forth between two vessels (pans, jugs, etc). Blowing on a hot cup of tea is a common method.
The cold tap water transports the heat of the hot Milo away (especially if the Milo container is thermally conductive (a metal or very thin) and especially if both the surrounding cold water and the hot drink are stirred.Therefore, it cools down faster!
it act as a volcano it will cool and harden