= For a smooth and polished surface on raw wood, sand it with a belt sander or a rotary (drill) mounted sander. Shops may have a 20 inch rotary which is lot better than 5 inch drill sander. Use gloves and eye shields. Begin with rougher sandpaper and go to finer for a smoother finish. On a car, use a fluffy soft buffer machine and wax, in shade, and one panel at a time. Apply wax, allow dry slightly and buff until shiny. =
Nope, the crater holes give it the look of Swiss cheese
Rub the surface down with emery cloth and water. This should give you a smooth surface to work on.
Tumblestones are natural pieces of gem which are tumbled with water and polishing compounds to give a lovely rounded, smooth shiny surface.
A weighing machine will give you the mass of an item. The weight of an item is the amount of force that an item exerts on the earths surface.
The exterior part of anything that has length and breadth; one of the limits that bound a solid, esp. the upper face; superficies; the outside; as, the surface of the earth; the surface of a diamond; the surface of the body., Hence, outward or external appearance., A magnitude that has length and breadth without thickness; superficies; as, a plane surface; a spherical surface., That part of the side which is terminated by the flank prolonged, and the angle of the nearest bastion., To give a surface to; especially, to cause to have a smooth or plain surface; to make smooth or plain., To work over the surface or soil of, as ground, in hunting for gold.
To give more traction on a dry surface. The rubber compound is very soft to provide traction but that is also why they do not last long.
Calendars in papermaking refer to machines that smooth and compress the paper surface, improving the paper's finish and properties like gloss and smoothness. These machines use a series of rollers to achieve this and are typically found at the end of the papermaking process before the paper is cut and packaged.
smooth as a babys bottom? or is that simile. its silk
An example of smooth muscle would be in your blood vessels.
If you didn't turn the rotors (have them ground to give a smooth, even surface), the uneven rotor face on the new pads may squeal.
yas this is the answer Give the name of the outward curve found on the surface of water Give the name of the outward curve found on the surface of water Give the name of the outward curve found on the surface of water Give the name of the outward curve found on the surface of water Give the name of the outward curve found on the surface of water Give the name of the outward curve found on the surface of water Give the name of the outward curve found on the surface of water Give the name of the outward curve found on the surface of water Give the name of the outward curve found on the surface of water Give the name of the outward curve found on the surface of water Give the name of the outward curve found on the surface of water v
Once you have cut the shaft to the specific size you need, you then need to sand about 1-2 inches of the paint at the bottom of the shaft and smooth it to give it a good surface to stick to.