It's generally better to just buy a rotary phase converter, as they are very complex.
To figure out what size rotary phase converter you need to figure out what type of equipment you have, how difficult is to start, and the AMP requirements of it. With this knowledge you can go to any company that sells rotary phase converters and figure out which one you need. http://www.rotaryphaseconverter.info/selectingrightsizerotaryphaseconverter.htm
If you want to install a phase converter, there are specific directions that you must follow. First, shut off the electricity to the device. Next, install the converter in a dry and vibration free environment. Install a ground cable that will run from the device to the converter.
Electric motor, the alternating-current alternator, and the rotary converter. A basic dynamo consists of a stator wound with copper coils and a magnetic armature. As the magnetic armature spins it induces a current in the copper coils.
Terminology gets misapplied but a 3-phase converter produces a 3 phase supply from a single phase supply. The only proviso is that generator, converter and motor are all suitably rated and compatible.
You can buy a rotary phase converter on home depot, Lowe's or online on http://www.americanrotary.com/
A rotary converter is a mechanical rectifier. A rotery converter is ment to convert AC power to DC power or DC to AC.
It's generally better to just buy a rotary phase converter, as they are very complex.
A rotary phase converter is a device that changes single phase electrical power into multiple phase electrical power.
A rotary phase converter is commonly used to convert a single phase electrical power source to three phases. This allows you to use three phases instead of one.
To figure out what size rotary phase converter you need to figure out what type of equipment you have, how difficult is to start, and the AMP requirements of it. With this knowledge you can go to any company that sells rotary phase converters and figure out which one you need. http://www.rotaryphaseconverter.info/selectingrightsizerotaryphaseconverter.htm
A rotary converter, which converts AC electricity to DC electricity is a largely obselete technology. However you can still buy them in a wide range of sizes. The cost depends upon their size and capacity. A small 5 hp device would cost around 400$. A 25 hp rotary converter costs around 2800$ and they go up from there.
No, it is illegal to remove a converter and besides the engine will not run correctly with the converter removed.
No, it is illegal to remove the converter. The car will also not run correctly without the converter in place.
Can 99 jeep run ok with-out catalic converter
Rotary convertor basically a dc motor running an ac generator all on one shaft Rotary invertor ac motor running dc generator. I think I have it the right way round
No, it will not run correctly and besides it is illegal to remove the converter.