dear friends, the answer for this question. go to www.Google.co.in then type sequential circuit having two d flip flops. u can find the answer for the same question at the top of the page itself.
A combinational circuit's output depends only on its current inputs. This means, it has a truth table. A sequential circuit's output depends on its previous inputs. This means, it's output will depend on which state it is.
the inputs are the sensors that detect intrusion, the outputs are the siren and the lights
An electronic tool that allows information to be inputs process and output is called?
First we need to set our output gole (Corresponding requirement) based on that we'll come to inputs.
Input and output devices are similar in operation but perform opposite functions. It is through the use of these devices that the computer is able to communicate with the outside world. Input data may be in any one of three forms: Manual inputs from a keyboard or console Analog inputs from instruments or sensors Inputs from a source on or in which data has previously been stored in a form intelligible to the computer
It was mentioned that there are two different ways to connect two or more electrical devices together in a circuit. They can be connected by means of series connections or by means of parallel connections. When all the devices in a circuit are connected by series connections, then the circuit is referred to as a series circuit. When all the devices in a circuit are connected by parallel connections, then the circuit is referred to as a parallel circuit. A third type of circuit involves the dual use of series and parallel connections in a circuit; such circuits are referred to as compound circuits or combination circuits. The circuit depicted at the right is an example of the use of both series and parallel connections within the same circuit. In this case, light bulbs A and B are connected by parallel connections and light bulbs C and D are connected by series connections. This is an example of a combination circuitBy EngineerMuhammad Zaheer Meer GMS
A combinational circuit's output depends only on its current inputs. This means, it has a truth table. A sequential circuit's output depends on its previous inputs. This means, it's output will depend on which state it is.
A multiplexer, commonly referred as an input selector, is a circuit with many inputs but only one output: it has some data inputs, control inputs and one output, depending on the control inputs, one input from the data inputs is sent to the output .A demultiplexer is a circuit with one data input, few control inputs and many outputs, it is also known as output selector.
In a combinational logic circuit, the output(s) depend only on the present values on the input, not on any previous values. In a sequential circuit, the output(s) also depend on the previous values. A sequential circuit must contain a memory element (at least one flip-flop) to hold the state of the circuit.
It requires two inputs before the output turns on.
It requires two inputs before the output turns on.
so the input of a elevator is the people and the output of an elevator is the people getting out of the elevator
A sequential circuit is a type of logic circuit. It sends an output that is dependent upon the present input in addition to the history of the input. That makes it different from a combinational circuit, whose output depends solely on the present input. Given their reliance on input history (or stored input), sequential circuits are particularly useful in computer random access memory (RAM). The two types of sequential circuits are synchronous circuits and asynchronous circuits.
An AND circuit is a circuit that takes two or more inputs, and generates an output that is the boolean AND function of those inputs. Two light switches in series, for instance, is an AND circuit because both switches have to be on for the light to be on. If the switches were wired in parallel to each other, and then in series with the light, that would be an OR circuit.
Is your question from digital electronics if yes than, AB + AB = AB ;and we can get this by using an 2 input AND gate(7408) where the two inputs are A & B and output will be AB. Only valid in digital domain.
It has 3 inputs. They are source, n gate, p gate and only one output that is drain
A Synchronous Sequential Circuit is a system whose behavior can be defined on the timing of their signals , where in the case of asynchronous sequential circuit depend upon the order in which its inputs signals change and can be affected at any instance of time . (reference : M. Moris Mano)