An insulator?
Rubber wire!!!!
Wire is not equal to resistance. If you have two pieces of wire with the same thickness, composition, and temperature, the longer piece has higher electrical resistance.
increased electrical resistance
The resistance of a wire is proportional to its length so increasing the length would increase the resistance of the wire. The higher the resistance of a wire the lower the voltage will be across the bulb so theoretically, the bulb will be somewhat dimmer.However, the resistance of a wire is extremely low compared to that of the light bulb. Electrical wiring is designed and installed so that the wire resistance is insignificant compared to the resistance of the load, such as the bulb. In a well planned wiring system, it will be impossible to see any difference in brightness in bulbs regardless of their location in the electrical circuit. In most cases, it will require very sensitive measuring equipment to detect any difference at all.
Unless the wire is broken, a bent wire should still be able to conduct electricity as well as a straight one.
Rubber wire!!!!
none the resistance is in the wire not the timer
It's dependent on the wire's composition. That is, what material it is made of. <<>> The electrical resistance in a wire depends on the wire's length and cross sectional area.
Wire is not equal to resistance. If you have two pieces of wire with the same thickness, composition, and temperature, the longer piece has higher electrical resistance.
increased electrical resistance
Yes, the resistance is directly proportional to length of wire and inversely proportional Area, hence when Length of wire increases the resistance also increases and when Area increases the resistance decreases. This means a thick wire has least amount of Electrical resistance.
electrical resistance
Thermal
increase
Reduce the resistance:-- Use a shorter piece of wire.-- Use thicker wire.-- Cool the wire.Increase the resistance:-- Use a longer piece of wire.-- Use thinner wire.-- File a nick in the piece of wire you have.-- Stretch the wire.-- Heat the wire.
The resistance of a wire is proportional to its length so increasing the length would increase the resistance of the wire. The higher the resistance of a wire the lower the voltage will be across the bulb so theoretically, the bulb will be somewhat dimmer.However, the resistance of a wire is extremely low compared to that of the light bulb. Electrical wiring is designed and installed so that the wire resistance is insignificant compared to the resistance of the load, such as the bulb. In a well planned wiring system, it will be impossible to see any difference in brightness in bulbs regardless of their location in the electrical circuit. In most cases, it will require very sensitive measuring equipment to detect any difference at all.
You would have a misfire and it may damage the coil if operated long enough in that condition.