Depends on what year and type of model you have. For instance a GSR distributor WILL NOT fit a regular Acura Integra. Open your driver side door look the sticker see what year it is and try to find out what your engine is as well.
Remove the bolts that hold the distributor cap onto the distributor. Once this is off the rotor can be reached and replaced on a 1994 Acura Integra.
no spark
$200
inside the distributor inside the distributor
within the distributor
1 3 4 2
if it looks exactly alike and bolts on exactly the sameway, it will work.
1-3-4-2 in a clockwise rotation... = 1993 Acura Integra 1.8 liter DOHC L4 =
right under your distributor down a little lower.
Ignition timing is set on a 1989 Acura Integra by setting the distributor to the appropriate angle. When set at the factory recommended angle the car will turn over with no problems.
91 acura integra has a b18 91 acura integra has a b18
1995 Acura Integra probably doesn't have a distributor, it would have coil packs, follow your spark plug wires from the spark plugs back. where the spark plug wires stop that's what has taken the place of your distributor. Its computer controlled the computer is probably under the dash on the passenger side of the car