Remove the bolts that hold the distributor cap onto the distributor. Once this is off the rotor can be reached and replaced on a 1994 Acura Integra.
See http://www.ehow.com/how_4506404_replace-rotor-acura-integra.html
Clockwise.
remove the rotor bolts(philips). do not strip them. take off caliper bolts 12mm and caliper carrier 14mm. you can remove also the metal plate on the arm for more room
You'll need to remove the wheel, the brake pads and the caliper. Once all of that is out of the way, there are rotor retaining screws that need to be removed, either on the studs, or on the axle itself.
timing belt probley comon thing
how do you remove a distributor rotor on a 92 Nissan sentra
1-3-4-2 Rotor turns clockwise.
It's the distributor rotor that you are looking for & it's under the distributor cap. Remove the distributor cap and there you will find the rotor.
remove rotor from Mercedes 450sel?
It pulls off.
Have you checked the rotor inside the distributor. Had the same problem recently. Opened up the Distributor and the screw that holds the rotor was out and the rotor was cracked. Part costs about $8.00.
After the tires and calipers are off take a big hammer and let out some frustrations. Make sure you turn the rotor a little each time you hit it.