0
After manufacturing a tablet in weight variation test if it show a low weight variation does it indicate it is a good tablet in every condition?
Wiki User
∙ 14y ago
I believe you are asking if you can assume that all tablets in a production run are acceptable if your standard deviation is low. My answer to that is that you can assume they are all acceptable, providing that the tablet press was not stopped during the run and that the granulation was a very good blend with no interruption in the flow of the material to the press.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the style of tablet does not contain a physical keyboard?
I believe that most accept the term 'slate'.
What can you use to clean the toliet?
Putting a tablet in the tank helps, but sometimes a stiff round brush is needed to clean the bowl.
What is the snipping tool for?
Snipping Tool is an application included in Windows 7, Windows Vista, and Experience Pack for Windows XP Tablet PC Edition 2005. It was originally released as a powertoy for the Tablet PC launch on November 7, 2002. The program is a screen-capture tool that allows taking screenshots (called snips) of an open window, rectangular areas, a free-form area or the entire screen. Snips can then be annotated using a mouse or a tablet, saved as an image file (PNG, GIF, or JPEG file) or an HTML page, or e-mailed.http://en.wikipedia.org/wiki/Snipping_Tool
What are the different types of tablet coating machines?
Tablet coating machines are used to cover the tablet surface with a thin film layer. The film is mostly used for: Hide the pill's color, flavor, and odor. Protection against physical or chemical damage to the drug. Regulate the medication's release. prevent the medicine from disintegration by digestive fluids. Enhance the tablet look - make the product more attractive. Include medicines or ingredients in the layer to prevent incompatibility with chemical products. Tablet coating machines operate on the basic premise of applying coating materials to a set of tablets in a bed that may move horizontally or vertically. A simultaneous airflow allows the solvent to evaporate. The coating is spread uniformly throughout the tablets by the bed's movement. There are now numerous varieties of tablet coating machines on the market. The following are the three main categories. 1. Standard Pan This comprises an approximately 15 to 200 cm (6 to 80 centimeters) diameter circular metal pan that is inclined on a tabletop stand. An electric motor can be used to rotate the pan. The panel is configured to rotate after loading a batch of tablets. The movement of the tablets leads them to tumble within the pan. In the rotating tablet bed, the coating solution is sprayed in atomized form, which generates a quick and equal distribution. Drying efficiency may be accomplished easily by: I. The immersion sword - the drying air is spread through a perforated metal sword immersed in the bed. II. Using a baffled pan and diffuser enables the consistent dispersion of dried air throughout the surface of the tablet. III. An immersion tube system - the tube is submerged in the bed and provides hot air via the spray nozzle. 2. Perforated Pan This equipment is composed of a partly or fully perforated drum, which rotates on its horizontal axis and the complete system is enclosed in a sealed housing. The coating solution is applied through spray nozzles inside the tank in all perforated pan systems. 3. Fluidized Bed System The chamber generally is a vertical cylinder in a fluidized bed processor. A column of air that flows up from the lower center of the cylinders fluidizes the pellets. The tablets in the center travel upward and downwards through the chamber wall, from the base of the column into the air stream again. In the base and top of the chamber, there are spray nozzles used to insert the coating solution. The core of the pellet is fragile, abrasive, and tearing-prone, which makes it difficult even under optimal conditions to completely coat the tablet. This is due to the tablet-to-tablet collision as well as the contact between the tablet chamber and the tablet. Two main configurations are utilized to implement fine tablet coating solutions: I. High-Pressure Airless System Airless spray fluid is pushed into a small orifice between 0.02 and 0.2 mm in diameter at the high pressure of 1.7 to 20 MPa (250 to 3000 Psi) to produce a fine spray. The atomization degree and the spray rate are all regulated by fluid pressure, viscosity, and size of the aperture. II. Low-Pressure Atomized Air Systems The liquid is pushed through a wider opening between 0.05 and 2.5 mm in diameter with a relatively low pressure of 35 – 350 kPa (5 to 50 psi). At the top of the atomizer, the low-pressure air reaches the liquid stream and a finely distributed spray pattern is created. The degree of atomization is determined by the size of the aperture, fluid viscosity, fluid pressure, air cap design, and air pressure.
What are the 5 products of science and technology?
5 Examples of Technology You Can Use Now Smartphones Automatic lights Activity and health monitoring Tablet computers Automated cabinets
Tablet Manufacturing Company?
Tablet Manufacturing Company
Why stainless steel is not used for manufacturing tablet punch?
Stainless steel can be used for manufacturing tablet punch.
What is the weight variation limit of tablet?
The weight variation test is performed by taking few tablets from the batch and finding out their average weight, say 'x'.then individual tablets are weighed and deviation or % deviation from average weight is determined. There is certain acceptable range for the tablets falling in the certain weight ranges.
What is compression technology in pharmaceutical manufacturing?
Compression technology refers to the compression of tablets (pills) during the drug formulation or manufacturing process. Since the most common method of drug delivery is the oral solid dosage form, a great amount of research and time has been put into perfecting the compression technique. There have been recent innovations and advancements in compression equipment to minimize tablet weight variation.
Tablet Computer?
form_title=Tablet Computer form_header=Problems with your tablet computer? Don't know how to fix it? Find a certified technician to repair it today. Brand of tablet?*= _[50] Model of tablet?*= _[50] Condition of tablet when purchased?*= {New, Used} What problem(s) are you having with your tablet computer?*= _Please Explain[100] Is your tablet still under warranty?*= () Yes () No
Which grade of clean room is required for tablet manufacturing unit?
100000 or class D , it is depends on your validation of room /area
Can you use a different tablet pen on another tablet?
Pen tablets are used for graphics, designing and many other purposes. One can use one tablet pen on other if both are in working condition.
How much is a nook tablet worth when it is used?
Depends on how much it's used, or what condition it is in. Perfect condition: Around $99 Not so perfect condition: anything under $99
What is tablet whiskering?
Tablet whiskering refers to the formation of fine, hair-like lines on the surface of a tablet. It is typically a cosmetic issue caused by the drying process during tablet manufacturing and does not affect the efficacy or safety of the medication.
Whiskering occurs in tablet due to?
these are the defects occurring during the manufacturing of the tablets say for example whiskering,picking,sticking,capping etc etc
What is the value of a Dr Pierces anuric tablet bottle?
A blue, blown glass Dr Pierces anuric tablet bottle, is worth about $15 to $20 in good, clean condition with no cracks or chips. If it has an intact label, the value could be closer to $30, depending on the condition of the label.
What is pharmaceutical manufacturing laboratories?
it means developing area of any dosage form like tablet,capsule,syrup,suspension etc. in this laboratories they get the active ingredients and excepients from different suppliers and develops the new products this is called pharmaceutical manufacturing laboratories................
